Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out. Once off, release the odometer button and start the car.
People also ask, how do you clear the maintenance message on a Rav4?
- Turn The Ignition ON. Don’t Start The Engine.
- Press The ODO/TRIP BUTTON To Display To ODO.
- Then Turn The IGNITION To OFF.
- Press And Hold ODO/TRIP BUTTON And Turn Ignition To The “RUN” Position. Hold Knob For At Least 5 Seconds Until “000000” Is Displayed.
- Then Turn The Ignition OFF.
Likewise, how do you turn off the maintenance required light on a Toyota Rav4 2020?
Additionally, how do you reset the maintenance required light on a Toyota Rav4 2019?
Frequent question, why does my RAV4 says maintenance required soon? The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. The light illuminates for about 3 seconds and then flashes for about 15 second every 4,500 miles after the maintenance has been reset.The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.
Contents
How do you turn off the maintenance required light on a Toyota Camry?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.
How do you turn off the maintenance required light on a Toyota Corolla?
- Use your keys to turn the key to the “On” position in your Toyota Corolla, but don’t start the car.
- Locate and press and hold the “trip reset” button on the odometer.
- Then, turn the key back to “Off.”
How do I reset my Toyota warning light?
Put your key in the ignition and turn it to position one, the position just before starting the car. Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out.
How do you turn off the maintenance required light on a Toyota RAV4 2021?
How do you turn off the maintenance required light on a Toyota RAV4 2017?
How do you turn off the maintenance required light on a Toyota RAV4 2018?
To reset the maintenance light on a 2018 toyota rav 4: insert the key into the ignition. Press and hold the trip meter reset button. Turn the engine switch to the “on” position. Hold the trip meter reset button until the trip meter displays “000000.” The maintenance light is reset.
How do I turn off maintenance required?
How do I reset my maintenance required message?
- Turn ignition switch to the ON position.
- Set the Odometer/Trip Display to TRIP A mode.
- Turn the ignition switch to the OFF position.
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
- The Service Maintenance Reminder Light will.