Contents
How do you reset the service engine soon light?
- Turn the ignition switch to the on position but do not start the car.
- Count seven seconds, depress the gas pedal and hold it down for 10 seconds or until the service engine soon light begins flashing.
How do I reset my Nissan check engine light?
- Turn off your car’s ignition.
- Put on safety goggles and gloves.
- Locate the negative terminal of your car’s battery.
- Loosen the nut on the negative battery terminal with a wrench, then pull the connector off the battery.
- Reconnect the negative cable and re-tighten it.
What does service engine soon light mean on Nissan Rogue?
The check engine and service engine soon lights are an indication that something is wrong. … The problem may be an engine misfire that could damage the catalytic converters. In the case of a blinking check engine light, it is strongly recommended that you have your vehicle serviced immediately.
How do you reset the maintenance light on a 2011 Nissan Rogue?
- Turn the ignition to run (one position before starting engine).
- Press the square button repeatedly until SETTINGS is highlighted.
- Press the square button to select SERVICE and follow the prompts to RESET.
How do you reset the maintenance light on a 2012 Nissan Rogue?
What does service engine soon light mean on 2009 Nissan Altima?
Meaning of the Service Engine Soon Light The check engine light is a light to warn you to a possible issue with your exhaust system or emissions system. The service engine soon light can come on for minor issues like a loose gas cap, or for more major problems such as possible engine failure.
Is Service engine Soon the same as check engine?
The “Check Engine” light is a notification that something is wrong, the range can be anything from a loose gas cap to a faulty ignition coil. … The “Service Engine Soon” light indicates that your vehicle is due for its next service maintenance.
How do you reset the 2009 Nissan Altima?
To reset the security system or immobolizer in your 2009 nissan altima depress the key fob’s panic button for five seconds before pressing the lock button twice standing 10 feet away from the vehicle. Follow by depressing the unlock button twice and your immobolizer should be reset.
How do you reset the maintenance light on a 2009 Nissan Versa?
- Turn the ignition to the “RUN” position.
- The wrench symbol light will turn on for about 5 seconds, then turn off.
- Press the “TRIP’ button and hold for 3 seconds during the time the wrench symbol is illuminated.
- Press the “TRIP” button to increase the interval distance.
Can I drive with the service engine soon light on?
That having been said, you can probably drive safely with the service engine soon light on, as long as it is on solid and not flashing. If the service engine light is flashing, you should pull over immediately and call for roadside service and have the vehicle towed to the mechanic.