The Ford F-150 holds 14 quarts of transmission fluid. The transmission fluid needs to be replaced every 30,000 to 60,000 miles.
Also the question is, how many quarts of transmission fluid does a 2013 Ford F150 take? A 2013 Ford F-150 transmission flush also uses about 10 quarts of fluid to altogether clean and flush out the system.
Similarly, what type of transmission fluid does a Ford F-150 use? Motorcraft® MERCON® LV is a premium-quality automatic transmission fluid recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require MERCON® LV type fluid. This product also provides excellent performance in electronically controlled automatic transmissions.
Beside the above, how much transmission fluid does a 2010 Ford F150 take? The transmission fluid capacity for the 2010 Ford F-150 iS5 quarts for the initial fill or 13.9 quarts for a total fill. The type that should be used is any OE Fuel-Efficient Synthetic Automatic Transmission Fluid. The fluid is used to lubricate parts of the transmission for the best performance.
Moreover, how many quarts of transmission fluid does a Ford f150 2008 take? The 2008 Ford F-150 uses Dexron III Transmission Fluid. It has a capacity of 13.9 quarts. Transmission fluid, similar to oil, is a lubricant and its purpose is to make sure that the various working parts of the transmission are not subject to damage from heat.
Contents
How much transmission fluid does a 2000 f150 take?
Remove the cap from the top of the tank. Using a funnel, pour the new fluid carefully into the reservoir until it reaches the fill line. This should take about 4 quarts.
How many quarts of transmission fluid does a 2014 Ford f150 take?
A 2014 Ford F-150 transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.
How many quarts of transmission fluid does a 2014 f250 take?
When equipped with an automatic transmission, the Ford F-250 requires 17.6 quarts of transmission fluid or 11.7 quarts with a manual transmission.
How many quarts of transmission fluid do I need?
A typical fluid change will require anywhere from 3 to 6 quarts of ATF depending on the application, a new filter and a pan gasket (or RTV sealer) for the transmission pan.
What transmission fluid does Ford recommend?
MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
How much transmission fluid does a 2006 Ford F-150 take?
The 2006 Ford F-150 transmission fluid capacity is 18 quarts. The transmission is one of the most important parts of the vehicle.
What transmission fluid does a 2010 f150 use?
Motorcraft – MERCON® LV Automatic Transmission Fluid ATF, 1 Quart (Part No. XT10QLVC) The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
How much transmission fluid does a 2005 Ford f150 take?
The truck has a transmission fluid capacity of 17 US quarts. The fluid specification for this vehicle iS6R80 for the 6 speed tranny, and 4R100 for the 4 speed. My 2005 f 150 takes Mercon V.
How many quarts does a 2004 f150 take?
The following engines available for the 2004 Ford F-150 all use 6 quarts of 5W20 synthetic oil: the 4.2L V6 (base), the 4.6L V8, the 5.4L V8 (engine code [3] 3), the 5.4L V8 (engine code [M] M), and the 5.4L V8 (engine code [Z] Z).
What transmission fluid does a 2008 Ford F-150 take?
The 2008 Ford F-150 uses Mobil 1 Synthetic Transmission Fluid Dexron/Mercon. To change the transmission fluid You will want to first make sure the car is level on the ground and then pop the hood open. Now locate the transmission fluid container, it should be on or near the transmission itself, and find the dipstick.
How do you check the transmission fluid on a Ford F-150?
Most ford f-150s have a transmission fluid dipstick located on the left side of the engine bay, behind a yellow ring. Some newer models have a dipstick on the actual transmission body that is meant to be accessed by trained mechanics. Using the dipstick, you can inspect the condition of the fluid and the fluid level.
What transmission fluid does a 2007 F150 take?
The type of transmission fluid the 2007 Ford F-150 uses is Dexron/Mercon. The transmission fluid needs to be replaced every 30,000 to 60,000 miles.
How much transmission fluid does a 2001 F150 take?
The 2001 Ford F-150 uses Mercon V automatic transmission fluid, which is atf4. This vehicle has a transmission fluid capacity of 14 quarts. This fluid can be found in one quart and one gallon sizes.
How much transmission fluid does a 2003 Ford F150 take?
The 4R70W in the ’01-‘03.5 (Heritage) F150 specifies approximately 14 quarts of Mercon V transmission fluid. Under normal circumstances, approximately 4.5 quarts of MerconV will be present in the actual “fluid pan” of the transmission, with the remaining 9.5 quarts in the torque converter and in the cooler lines.
How many quarts does a 2002 F150 take?
The 2002 Ford F-150 with the 4.2L V6 engine option requires 6 quarts of 5W20 synthetic oil. The optional 4.6L V8 engines (engine code [6] 6 or [W] W) for the 2002 F-150 require 6 quarts of 5W20 synthetic oil.