You must quickly locate the expansion tank that contains the coolant of your Chevrolet Trax, it is generally based in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.22 fév. 2020
Contents
Where does the antifreeze go in a 2016 Chevy Trax?
What type of coolant does a Chevy Trax take?
The 2016 Chevy Trax coolant type is Prestone Dex-Cool Extended Life 50/50.
Where do I pour my engine coolant?
Is antifreeze and coolant the same?
Well, antifreeze and engine coolant are similar, but not the same. Antifreeze is a concentrated, glycol-based liquid that must be diluted with water before use – at which point it is referred to as coolant. … Engine coolant is a mixture of antifreeze and water, with a common ratio of 50:50.30 oct. 2019
What kind of coolant is Dexcool?
ACDelco GM OE Dex-Cool Antifreeze Extended Life Coolant Concentrate is an orange, silicate and phosphate free, premium-grade coolant/antifreeze that is formulated with a chemical composition that minimizes breakdown of metal components in contact with the fluid.
How do you check antifreeze in a Chevy Trax?
1. Park your Chevrolet on a level surface.
2. Pull the hood release under the dashboard until you hear the Chevrolet hood pop open.
3. Locate the coolant reservoir (tank) in the engine bay.
4. Turn ignition on, but don’t start the engine and check engine temperature.
5. Remove the cap by turning it slowly counterclockwise.
How do you check the temperature on a Chevy Trax?
To check this, drive the car until it is warm, and then idle a few minutes, keeping an eye on the temperature gauge to make sure it doesn’t get too hot. One or both of the fans on the radiator should be spinning at this point. If it isn’t, then you have a fan problem.
What kind of antifreeze does a 2017 Chevy Trax take?
Prestone Antifreeze/Coolant GM Vehicles Dex-Cool CONCENTRATE *5 Year/150K Mile Protection* 1 Gallon.
Can you add new coolant to old coolant?
If the coolant was changed and flushed less than 5 years ago, then you could add coolant without a flush and complete coolant change. It’s a closed system, you should never have to add coolant unless there is a leak.
What happens if you put too much coolant in your car?
Coolant expands as it heats and contracts when it cools. The extra space prevents damage to your engine and hoses. … In worst case scenarios, overfilling your antifreeze tank can lead to electrical damage if overflow comes into contact with engine wiring.16 jan. 2018
Can you just add coolant to your car?
If your engine is cold, the coolant level should be up to the cold fill line. … If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water.
How often should I change my coolant?
A typical mechanic will recommend changing coolant every 30,000 miles. But many will tell you, changing the coolant is not even on their radar. An owner’s manual might recommend changing the coolant/antifreeze after the first 60,000 miles, then every 30,000 miles.6 déc. 2017
How do you add coolant to antifreeze?
How much should coolant cost?
On average you can expect to pay between $100 and $200 for a standard coolant change.