Look for the front jack point, and place your jack underneath it. While there are other suitable places you can use, this is by far the best and strongest jack point. The factory jack shows four other jack points, including two behind the front tires and two just behind the rear tires.
Contents
How do you jack up a 2007 Honda Accord?
How do you jack up a 2017 Honda Accord?
How do you jack up a 2018 Honda Accord?
Where are the jack points on a car?
The jacking points for most vehicles are reinforced metal ribs specifically designed to safely lift the vehicle. On most vehicles, there are four jacking points. They’re located under the car’s rocker panels, just behind the front wheels and just ahead of the rear wheels.30 avr. 2019
How do you jack up a car?
Can you jack a car from the control arm?
Control arm bushing should be fine, that’s where I usually lift the front of my Camaro. Just make sure you’re right under the bushing, not putting stress on the arm itself.2 nov. 2015
Where is the jack on a 2014 Honda Accord?
Where is the jack on a 2004 Honda Accord?
Jack points and jack stands Front-center is underneath the radiator, there’s usually some kind of arrow pointing to it. At the rear you put the jack under the towing loop.19 sept. 2010
How do you jack up a 10th gen Civic?
What is 9th generation Honda Accord?
The ninth generation Honda Accord is a mid-size car introduced in 2012 by Honda, and received a refreshed front fascia, grill, head lights, rear lights, and alloy wheel designs for the 2016 model year.
How do you change tire?
1. Find a Safe Location. As soon as you realize you have a flat tire, do not abruptly brake or turn.
2. Turn on Your Hazard Lights.
3. Apply the Parking Brake.
4. Apply Wheel Wedges.
5. Remove the Hubcap or Wheel Cover.
6. Loosen the lug nuts.
7. Place the Jack Under the Vehicle.
8. Raise the Vehicle With the Jack.
When did the Honda Accord come out?
1976
How do you change a tire on a 2018 Honda Accord?
1. Open the trunk floor lid.
2. Take the tool case out of the trunk. Take the jack and wheel nut wrench.
3. Unscrew the wing bolt, then remove the spacer cone. Remove the spare.
4. Place the compact spare tire (wheel side up) under the vehicle body,
5. Loosen each wheel nut about one turn using the wheel nut wrench.