1. Turn the ignition key to the “ON” position without starting the engine.
2. Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously for five seconds.
3. Activate the TPMS sensor.
Contents
Press and hold lock and unlock button on the key fob until horn sounds. Activate TPMS Tool on left front tire sidewall next to valve stem. Horn chirps once. Repeat for RF/RR/LR tires.29 mar. 2020
steering wheel
How do you calibrate a Chevy tire pressure sensor?
1. Confirm TPMS sensors are properly installed.
2. Adjust tire pressures to placard value.
3. Apply parking brake.
4. Turn vehicle to ON/RUN.
5. Push the trip odometer reset stem until Tire Pressure is displayed.
6. Push and hold trip reset stem to begin the sensor matching process.
How do you reset tire sensors?
Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel.
How do you reprogram a tire sensor?
What is the best TPMS relearn tool?
1. VXDAS EL-50448 TPMS Tool for GM – Editor’s Pick.
2. JDIAG 2IN1 EL50448 TPMS Relearn Tool for GM and Ford.
3. Autel MaxiTPMS TS501 TPMS Programming Tool.
4. VXSCAN El-50448 Auto TPMS Reset Tool.
5. ATEQ VT31 TPMS Reset Activation Programmer Tool.
6. Autel TS408 Handheld TPMS Service Tool.
7. Autel TS401 TPMS Programming Tool.
How do I fix my service tire monitor?
Starting with the vehicle off, turn your key to the “On” position, but don’t start the vehicle. Find the TPMS reset button (check your manual if you need help), and hold it until the tire pressure light blinks three times. Then, start the car and wait 20 minutes for the tire pressure light to reset.
What should the tire pressure be on a Chevy Malibu?
35 PSI
Can I reset the TPMS by disconnecting the battery?
Disconnect and Reconnect the Car’s Battery Your car has an onboard computer that checks all the sensors in the vehicle (including the tire pressure sensors) and decides what to do with that information. … A quick and easy way to reset your computer is to disconnect and reconnect your car’s battery.9 avr. 2020
TPMS stands for Tire Pressure Monitoring System. In most vehicles the TPMS reset button is found beneath the steering wheel. After changing the tires on your vehicle, the TPMS needs to be electronically reset in order to clear the error code.
How do I use the TPMS reset tool?
Why is my low tire pressure light on but tires are fine?
How do you reset the tire pressure sensor on a 2017 Chevy Silverado?
1. Turn the ignition key to the “ON” position without starting the engine.
2. Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously for five seconds.
3. Activate the TPMS sensor.