1. Turn on the ignition but do not start the engine. Make sure the parking brake is applied and the car is on level ground.
2. Select the OIL Level from the vehicle information screen.
3. The oil level will be displayed on the dashboard. You will see one of the following messages.
Contents
How do you check the oil on a 2009 Jaguar XF?
1. Open the hood (Bonnet)
2. Turn on ignition without starting.
3. Scroll through trip settings using trip button on end of turn signal stalk.
4. Stop on oil level indicator read out.
How do I check my oil level accurately?
Insert the dipstick into the tube slowly and push it all the way down. Now withdraw it and look closely at the tip, which should have oil on it. If the level of the oil is between the two lines, your vehicle has enough oil. If it’s at the low mark or below, it’s time to add a quart.13 juil. 2019
How do you read engine oil level?
What type of oil does a Jaguar XF take?
Jaguar exclusively recommends Castrol EDGE Professional oil, engineered to perfectly complement our engines and optimise performance.
How often does a Jaguar XF need servicing?
Service intervals are 21,000 miles or 24 months whichever comes sooner for diesel engines or 16,000 miles or 12 months whichever comes sooner for Petrol engines and 3.0litre Diesel engines. Plans available to purchase for up to 90 days after the vehicle registration (providing first service has not been completed).
How do you check the oil level on a Jaguar?
1. Switch on the ignition (do not start the engine).
2. Make sure that Park (P) is selected.
3. Select the Service menu using the instrument panel menu control (see LUBRICANTS AND FLUIDS). Select Oil level display from the Service menu.
How do you reset the service light on a Jaguar XF?
1. Press and hold rear fog lamp switch Ignition on, do not start engine.
2. Release rear fog lamp switch.
3. Press and hold trip button (end of left side stalk).
4. Press and hold rear fog lamp switch See resetting service light message in message center.
How much oil does a Jaguar XF take?
Engine and oil pan volume: 5.9 liters or 6.23 quarts US or 1.55 gallons US. Automatic gearbox oil volume : 8 l or 8.45 qt or 2.11 gal.
Should I check my oil while the engine is running?
Answer. We recommend checking the oil level either before turning on the engine or 5 to 10 minutes after shutting down so you can have all the oil in the oil pan to get an accurate measurement.
Is it best to check oil when engine is cold?
1. Park your car on level ground to ensure you get an accurate reading. Turn off the engine and wait 10 to 15 minutes for it to cool down. Manufacturers used to recommend that you check your oil when the engine was cold, to give the oil a chance to settle in the oil pan.21 sept. 2018
When should you check your engine oil level?
You should check your oil levels when your engine is cold. Wait at least 10 minutes after use before checking to ensure you get an accurate reading and don’t accidentally burn yourself on a hot engine.22 fév. 2021
Where should the oil level be on a dipstick?
There will be two marks on the dipstick to show the optimum level that your oil should be at. Your oil level should be somewhere between the two. If your oil level is below the bottom line, or if there isn’t any oil on the dipstick at all, you should immediately top up your engine oil.14 juil. 2015
How do you know when your car is low on oil?
1. Oil Pressure Warning Light. The most straightforward way that your vehicle will let you know it’s low on oil is with the oil pressure warning light.
2. Burning Oil Smell. Are you smelling burning oil inside of your cabin?
3. Strange Noises.
4. Weaker Performance.
5. Overheating Engine.
How much is too much oil on dipstick?
The dipstick is your gauge for abnormally high oil consumption. Real concern begins at about one quart for every 1,000 miles (0.95 liters for every 1,600 kilometers). It’s time to plan an overhaul if the problem advances to one quart every 500 miles (800 kilometers).