1. Turn off your ignition and wait for ten minutes.
2. Turn your key to one position to the right in the ignition — so that the electronics turn on, but your engine remains off.
3. Navigate to the vehicle information screen using your vehicle’s infotainment display.
4. Select ‘Oil Level’.
Contents
How do you check the oil on a 2009 Jaguar XF?
1. Open the hood (Bonnet)
2. Turn on ignition without starting.
3. Scroll through trip settings using trip button on end of turn signal stalk.
4. Stop on oil level indicator read out.
How do you check the oil on a 2010 Jaguar XF?
How do you check the oil on a Jaguar?
What oil does Jaguar XF use?
Jaguar exclusively recommends Castrol EDGE Professional oil, engineered to perfectly complement our engines and optimise performance.
How often does a Jaguar XF need servicing?
Service intervals are 21,000 miles or 24 months whichever comes sooner for diesel engines or 16,000 miles or 12 months whichever comes sooner for Petrol engines and 3.0litre Diesel engines. Plans available to purchase for up to 90 days after the vehicle registration (providing first service has not been completed).
How much oil does a Jaguar XF take?
Engine and oil pan volume: 5.9 liters or 6.23 quarts US or 1.55 gallons US. Automatic gearbox oil volume : 8 l or 8.45 qt or 2.11 gal.
How do you reset the service light on a Jaguar XF?
1. Press and hold rear fog lamp switch Ignition on, do not start engine.
2. Release rear fog lamp switch.
3. Press and hold trip button (end of left side stalk).
4. Press and hold rear fog lamp switch See resetting service light message in message center.
Where is the oil dipstick on a 2013 Jaguar?
How do you reset the oil light on a 2010 Jaguar XF?
What is the TYRE pressure for a Jaguar XF?
30PSI
How do you check the oil on a 2013 Jaguar XF?
How do you check the oil level on an F type?
How much oil does a 2016 Jaguar XF take?
Engine Oil 7.7 quarts (with filter)After refill check oil level.
How do you reset the oil light on a 2011 Jaguar XF?
1. With ignition off, press and hold the “REAR FOG LAMP” button.
2. While holding the button, turn the ignition on.
3. Release button immediately after.
4. Press and hold the trip computer cycle button.
5. Press and hold the “REAR FOG LAMP” button as well.