Turn the ignition “off” to reset the oil light by pressing the start button without touching the brake and holding the mph km / h button. Keep holding the mph km / h button while the reset is going on and until the reset is complete.
Best answer for this question, how do you reset the oil light on a Toyota Prius? Turn the vehicle completely off. Press and hold the “Trip” or “MPH” button. Continue to hold the “Trip” or “MPH” button while switching the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
Moreover, how do I reset my 2010 Prius?
Frequent question, how do you reset the oil light on a 2011 Toyota Prius?
Also, how do you reset the oil light on a 2009 Toyota Prius?
Contents
How often should you change the oil in a 2010 Prius?
Use the Time Estimate For example, the 2010 Toyota Prius has a recommended oil interval of one year or 10,000 miles — whichever comes first.
What oil does a 2010 Prius take?
The 2010 Toyota Prius oil type and capacity is 0w-20 and 4.4 quarts. Having high quality oil is important for the engine to run smoothly.
How do I know if my Prius battery is bad?
- A decrease in fuel economy.
- Fluctuations in the state of charge.
- The battery’s not holding a charge.
- The internal combustion system runs more than it should.
- Strange engine noises.
How often should you change the oil in a 2011 Prius?
Recommended Oil Change Intervals for Toyota Vehicles However, as engine technology has advanced and grew more efficient, this is no longer the case. Toyota recommends that customers change the oil in their vehicle, or have it changed for them by a professional every 6 months or 5,000 miles, whichever comes first.
How do I turn off the maintenance required light on my Prius?
- Hold in the brake and press the start until the car turns on.
- Continue to hold in the ODO while turning car off and on with START while foot on brake.
- The maintenance required light will be out.
How do you reset the maintenance light on a 2008 Toyota Prius?
How do you reset the maintenance light on a 2015 Prius?
Why is my maint reqd light on?
The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. … Most often this just means your vehicle might be due for an oil change.
How do you reset the oil light?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Press the the gas pedal slowly to the floor three successive times within 10 seconds. Turning the ignition off. If the light is still on the next time you start the truck, repeat the process.
Does a Prius need full synthetic oil?
Synthetic engine oil 0W20 required in 2010-2017 model year Prius models.