Amazingly, how do you reset the maintenance light on a 2010 Toyota Corolla? Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping. Then the light should go out.
Additionally, how do you reset the maintenance required light on a Toyota Corolla?
- Insert the keys in the Corolla.
- Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen.
- Turn the key back to “Off.”
- While pressing the button to reset the trip, turn the key back to the “On” position.
Best answer for this question, how do you reset a 2010 Toyota Corolla?
Quick Answer, how do you reset the maintenance light on a 2011 Toyota Corolla?
What Is the Maintenance Required Light? The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop.Contents
How do I turn off the maintenance required light?
How do you reset the maintenance required light on a 2009 Toyota Corolla?
How do you reset the maintenance light on a 2015 Toyota Corolla?
To reset the 2015 Toyota Corolla S maintenance light put the key in the on position, turn the key off, press and hold the odo/reset button and turn the key back to the on position without starting the engine.
Why is my maintenance required light on after oil change?
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How do I reset my car dashboard?
How do I reset my Toyota Corolla immobilizer?
Attempt a DIY reset by inserting the key in the ignition and turning to the “on” position, without cranking. Leave the key “on” for 10-15 minutes while the ECU reprogRams itself. Then turn the key to the “off” position. Try to start the vehicle.
How do I reset my ECU?
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
What is the tire pressure for a 2010 Toyota Corolla?
2010 Toyota Corolla Tire Pressure Recommended tire pressure for 2010 Toyota Corolla is 30 psi to 32 psi for front tires and 30 psi to 32 psi for rear tires.
Is maintenance required the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.