Also, how do you turn off the maintenance required light on a Toyota Corolla?
- Use your keys to turn the key to the “On” position in your Toyota Corolla, but don’t start the car.
- Locate and press and hold the “trip reset” button on the odometer.
- Then, turn the key back to “Off.”
Similarly, how do you reset the maintenance light on a Toyota Corolla 2020?
Moreover, how do you reset the maintenance required light on a Toyota?
- Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
- Turn the Vehicle Off and Press the Trip Meter Reset Button.
- Turn the Vehicle Back on.
- Keep the Reset Button Pressed.
- Release the Reset Button.
Amazingly, why is my maintenance required light on after oil change? Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
Contents
Why is the maintenance required light on?
The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.
How do you reset the maintenance light on a 2018 Toyota Tacoma?
How do you clear the maintenance required light on a 2017 Toyota Corolla?
How do you turn off the maintenance required light on a Toyota Tacoma 2020?
How do I turn off the maintenance required light on my Prius?
- Hold in the brake and press the start until the car turns on.
- Continue to hold in the ODO while turning car off and on with START while foot on brake.
- The maintenance required light will be out.
Is the maintenance required light the same as check engine?
Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.
Can you pass inspection with maintenance required light on?
You can’t pass a vehicle inspection with the maintenance light on. If an inspector sees this on, they can easily find the issues and fail you—so don’t try and hide it. The only way to pass inspection after failure is to get the proper repairs done.
How do you turn off the maintenance required light on a 2015 Toyota Corolla?
To reset the 2015 Toyota Corolla S maintenance light put the key in the on position, turn the key off, press and hold the odo/reset button and turn the key back to the on position without starting the engine.
How do you reset the maintenance required light on a 2016 Toyota Corolla?
How do you reset the tire pressure light on a 2017 Toyota Corolla?
Switch the ignition to “ON“. Locate the tire pressure reset button located on instrument panel, knee bolster or inside glove box. Press and hold the button until the tire pressure light flashes 3 times. Wait for about 3 minutes, then turn the ignition to “LOCK” or “OFF“, and you’re done.