The easiest way to boost your articulation is to disconnect your front sway bar links. This can typically be done in just a few minutes with just a few tools. Doing this will greatly boost your Wrangler’s flex and it will make the ride on the trails smoother.
Also, how do you disconnect a sway bar? The motor is attached to a shift fork which holds up the spline. Once the driver presses the disconnect function on their control button, the motor will push against a small switch attached to the shift fork. This causes the spline to push the two ends of the sway bar apart, disconnecting them.
Also know, can you disconnect the sway bar on Jeep Wrangler sport? Well-Known Member. On the Sahara and sport models the sway bar links are bolted on. You can disconnect them, you just have to unbolt them.
Likewise, can you disconnect a sway bar Jeep JK? Yes, and yes. Disconnecting your sway bar will allow for better axle articulation. Meaning, your front tire can drop down further to keep in contact with uneven ground. You don’t get traction if your tire is off the ground on an uneven trail.
People ask also, what does the sway bar button do on a Jeep?
Contents
Should you disconnect rear sway bar?
There’s no reason to disconnect the rear sway bar. The rear sway bar helps keep the body straight when the front end is twisted up and without it the Jeep will feel far worse when in off camber situations without it.
How does Jeep electronic sway bar disconnect work?
This is an electric sway bar disconnect and is activated via a button inside the vehicle. It operates on the front sway bar and can only be disconnected in either 4-high or 4-low. Once you press the button to disconnect the sway bar the light on the dashboard will blink.
How do you use a quick disconnect sway bar?
What happens if I disconnect my sway bar?
With your sway bar connected, this movement is limited. If you disconnect that sway bar, you can roam the dusty hills more freely. A number of modern vehicles feature electronically disconnecting sway bars. On these vehicles, you don’t need to get under your rig with a set of tools to disconnect your sway bar.
How does Rubicon sway bar disconnect work?
Each piece has a gear on the end, inside the housing under the front bumper. When engaged the gears are joined by a splined collar, making the bar act as one long bar. When disengaged the collar moves to one side allowing the bars to rotate independently of one another.
Why does my Jeep Wrangler sway?
Most of us consider sway to mean the body sways from side to side. If you are talking about the Jeep going from left to right after hitting a bump, that is more of a wander. Wandering can be caused by over inflation of tires, worn steering components or the sway bar being disconnected.
Do all Jeeps have a sway bar?
Almost all Wranglers now feature stabilizer bars in 2 places – the front and back so that they can improve their steering capabilities and make sure that they do not flip over easily. Jeeps can use two types of sway bars, either solid or tubular.
When should I remove sway bar from Jeep JK?
Do all rubicons have sway bar disconnect?
Jeep Rubicons have some great features and are great trail rigs, BUT, the Rubicon sway bar disconnect sucks. … This is not an uncommon issue and Jeep knows it. Just about every Rubicon owner who wheels at all will eventually deal with it – and then have to make a choice.
What is a Jeep Death Wobble?
The death wobble refers to when your entire Jeep starts shaking in an uncontrollable and violent manner. Not to be confused with an alignment issue or a normal amount of road vibration, the death wobble will impact your entire vehicle, not just the steering wheel.