On the steering wheel, navigate to the “Oil Life” selection under “Vehicle Info“. Push and hold the OK button until the oil light percentage changes to 100%. Press the Start/Stop button to turn the electronics off.
Moreover, how do you reset the oil light on a 2016 Jeep Cherokee?
In this regard, how do you reset the oil life on a 2015 Jeep Cherokee?
Similarly, how do you reset the oil life on a 2017 Jeep Cherokee?
Subsequently, how do I reset my oil life?
Contents
How do you turn off the change oil light on a Jeep?
- Without starting the engine, turn the ignition in the ON/RUN mode position.
- In the instrument cluster display, navigate to “Vehicle Info” then “Oil Life.”
- Push and hold the ‘OK’ button until the oil life gauge resets to 100%.
Why is my oil light still on after oil change?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. … The next common cause is low oil pressure.
Why won’t my oil light go off?
If the light comes on and stays on this may mean two things: The engine needs oil or the oil light needs to be reset.
How do I reset my oil change percentage?
- Press the setup button and then release it.
- You should now see a message that reads “Oil life % hold reset = new.”
- Press the reset button and hold it down for about two seconds.
- Let off the button and the “Oil Life [percentage (%)]” should reset to 100%.
How do you reset the oil light on a 2010 Jeep Cherokee?
How do I check the oil on my Jeep Cherokee?
How do you reset the oil light on a 2012 Jeep Cherokee?
How do you reset the change oil light on a 2011 Jeep Wrangler?
How do you reset the check engine light on a Jeep?
- Make sure the engine is not running and key is out of the ignition.
- Disconnect the battery terminals.
- Wait 5 minutes.
- Reconnect battery terminals.
- Insert and turn the ignition key to the run position without starting.
- All error codes are cleared and CHECK ENGINE icon disappeared.
Can you still drive with oil light on?
You should not drive with the Oil Light on as this can cause extensive damage to your vehicle’s engine. … If this light comes on, pull over to the side of the road and turn the vehicle off so as not to do any further damage, and seek to have your Oil Light inspected as soon as possible.