To use the wrench, slide the open end of the wrench over the cooler line, then slide the wrench down the line until it reaches the nut used to secure the line to the transmission. Use the wrench to loosen the nut located at the end of each line, then pull the line away from the transmission to remove it.
Frequent question, do transmission lines run through the radiator? All transmissions have a cooling line that runs to the radiator. A separate fluid passage circulates the transmission fluid through a portion of the radiator to cool the fluid.
In this regard, how do you change a transmission cooler line?
- Raise the Vehicle. It would be best to work on level ground to ensure that your vehicle does not lean too much on the jack when lifted.
- Drain the Transmission Fluid.
- Remove the Old Line.
- Install the New Cooler Line.
- Replenish the Transmission Fluid.
- Double-check.
You asked, does it matter which transmission line goes where on radiator? Generally the higher line on the radiator has fluid going INTO the transmission and the lower one goes back to the transmission, so the higher line has fluid coming out of it and the lower line sucks it back into the transmission.
Also the question is, why do transmission lines go to the coolant radiator? Car transmission lines connect your vehicle’s transmission to the vehicle’s radiator. … Your car’s transmission lines are essential to preventing the transmission from overheating by carrying hot fluid away from the transmission until it is cooled and subsequently pumped back into the transmission.
How do you remove a transmission line from a Ford radiator?
What happens if you put transmission cooler lines backwards?
You may want to flush the lines and or cooler- if the lines are backward you could have dislodged some debris and it is working like a check valve.
Should I bypass my radiator when installing an external transmission cooler?
Should I Bypass My Radiator When Installing An External Transmission Cooler? … It is recommended however to keep the factory radiator transmission cooler and use and external cooler if you live in a cooler climate. The factory cooler will help get the transmission temperature into a suitable range.
What happens when transmission cooler line breaks?
Like all parts of an engine, transmission cooling lines can wear out. If they break or develop a leak, you will lose transmission fluid, leaving your car vulnerable.
How long does it take to replace transmission line?
Getting the cooling line in your transmission repaired can be a time-consuming job. Transmission repairs often take a day or two at the mechanic depending on how extensive they are.
How much does it cost to replace a transmission cooling line?
You will pay somewhere between $100 and $450 for a transmission cooler line replacement. The labor should be between $60 and $300, while parts can cost you anywhere from $40-$160.
What is transmission cooler line?
Your transmission cooling lines, often just called the transmission lines, are the lines that connect your transmission to the radiator in your car. The hot fluid cools off in the radiator and then heads back to the transmission.
What line is the return line on a transmission?
The lower line near the bottom will be the return line.
Can you use hose clamps on transmission cooling lines?
Barb fittings are the most common type of transmission cooler line fitting, and it used with rubber lines. These fittings are a push fit type that allow for a standard hose clamp to keep the transmission line in place.
How do you find the return line on a transmission?
The surest way to find the return line in a transmission cooler system is simply to run the cold engine for about 15-seconds while it is in gear. Then immediately feel the two transmission lines.