Don’t love it when folks post using acronyms? It turns out that Googling HMMF (Honda Multimatic Fluid) brings up threads from here! It is a type of CVT fluid (continuously variable transmission)
People also ask, what is HMMF oil? Honda HMMF stands for Ultra Multi Matic Fluid (HMMF). It is a fluid for continuously variable transmissions (CVT). Oil for variable speed transmission Honda cars. Provides system CVT (HMM – one of its variants), based on the method of starting the clutch in cars HONDA, and has a longer life.
Additionally, how do you reset the HMMF light on a Honda Insight? Press and hold the SELECT/ RESET button in the instrument panel and turn the ignition switch to run (one position before starting). Hold the button for at least 10 seconds, until the indicator resets.
Also know, how much oil does a 2010 Honda Insight take? Total charges for the oil change was $45.56, and $29.64 of that went to 4 quarts of oil. Although, the Insight only uses 3.4 quarts.
Likewise, how do you reset the HMMF light on a Honda Fit Shuttle?
Contents
What is Cvtf oil?
CVTF – Continuously Variable Transmission Fluid.
How do I reset my Honda Insight Cvtf?
To reset the cvtf light on a honda insight you will need to put the car in the on position and press select/reset until the screen says cvtf percentage, then you hold down select/reset until it all clears.
How do you reset the maintenance light on a 2011 Honda Insight?
- Turn the ignition key to the “ON” position without starting the engine.
- Press the SEL/RESET button repeatedly until Remaining Oil Life appears on the display.
- Press and hold the SEL/RESET button to enter the Maintenance reset mode.
How do you reset the maintenance light on a 2012 Honda Insight?
What kind of gas does the Honda Insight take?
Use of unleaded gasoline of 87 octane or higher is recommended. Honda recommends TOP TIER Detergent Gasoline where available. Do NOT use gasoline containing more than 15% ethanol.
How do you change the transmission fluid on a 2010 Honda Insight?
How do you reset the maintenance light on a 2010 Honda Insight?
Press and hold the “SEL/RESET” button for more than 10 seconds. The oil life reset mode will be shown on the multi information display. Select “RESET” by pressing the “INFO” button and then press “SEL/RESET” button to reset the oil life display.
How much oil does a 2013 Honda Insight take?
Engine Oil 3.2 quarts. w/ofAfter refill check oil level. 3.4 quarts (with filter)After refill check oil level.
How much oil does a 2000 Honda Insight take?
Capacity: 2.6 quarts (with filter)After refill check oil level. 2.4 quarts.
How do you reset the service light on a Honda Fit Hybrid?
- Turn the ignition to run (one click before starting the engine).
- Press the Select/Reset button located on either your steering wheel or as a knob on your dash.
- Press and hold the Select/Reset button for 10 seconds.