To reset Your 2010 Honda Insight oil life indicator, press and hold the SEL/RESET button for more than 10 seconds. The oil life reset mode will be shown on the multi-information display. Select RESET by pressing the INFO button. Then press the “RESET button to reset the oil life display.
Furthermore, how do I reset my Honda Insight? Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multiinformation display. Select ”RESET” by pressing the INFO ( / ) button, then press the SEL/RESET button to reset the engine oil life display.
Likewise, how do I reset my Honda Insight Cvtf? To reset the cvtf light on a honda insight you will need to put the car in the on position and press select/reset until the screen says cvtf percentage, then you hold down select/reset until it all clears.
Another frequent question is, how do I reset my 2010 Honda Civic?
Also, how do you reset the maintenance light on a 2009 Honda Insight?
Contents
What is HMMF in Honda Insight?
It turns out that Googling HMMF (Honda Multimatic Fluid) brings up threads from here! It is a type of CVT fluid (continuously variable transmission)
How do you turn off the service light on a Honda Insight?
- Start with the car off.
- Insert the key but do not turn it (LOCK (0) position).
- Press and hold the trip button.
- While holding the button turn the key to the (ON (II) position).
- Continue holding the button until indicator resets (about 10 seconds).
How do you reset the HMMF light on a Honda Insight?
Press and hold the SELECT/ RESET button in the instrument panel and turn the ignition switch to run (one position before starting). Hold the button for at least 10 seconds, until the indicator resets.
Models with TPMS Button: If your Honda is equipped with a TPMS button, you’ll find it to the left of the steering wheel. Press and hold the button until the warning light blinks twice.
How do you change the transmission fluid on a 2010 Honda Insight?
How do you reset the service light on a Honda Fit Hybrid?
- Turn the ignition to run (one click before starting the engine).
- Press the Select/Reset button located on either your steering wheel or as a knob on your dash.
- Press and hold the Select/Reset button for 10 seconds.
How do I reset my Honda CVT?
How do you reset the oil life on a 2010 Honda?
How do I reset my oil life?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the TPMS on a 2011 Honda Civic?
- Press MENU.
- Select Customize Settings.
- Select TPMS Calibration.
- Select Initialize.
- Select Yes.
- Press MENU to exit.