Push and hold down the “select/reset” button for approximately 10 seconds until the maintenance-required light starts to blink on and off. Push and hold the “select/reset” button for about five more seconds until the maintenance light resets.
People ask also, how do you reset the maintenance light on a 2015 Honda Odyssey?
Likewise, how do you reset the maintenance required light on a 2005 Honda Odyssey?
Also know, how do you reset the maintenance light on a 2011 Honda Odyssey?
Also, how do you reset the maintenance light on a 2006 Honda Odyssey?
- Put the key in the ignition slot and turn it into the second position.
- Press the ▲or▼ INFO button repeatedly until Remaining Oil Life appears on the display.
- Press and hold the RESET button.
- Select RESET.
Contents
How do you reset the oil life on a 2017 Honda Odyssey?
- Turn the ignition to run (one position before starting engine).
- Press and hold the SELECT/RESET knob for 10 seconds or more.
- Select oil life with the SELECT/RESET knob.
- Press and hold the SELECT/RESET knob for a few seconds to enter the reset mode.
How do you reset the maintenance light on a 2004 Honda Odyssey?
How do I turn off the maintenance required light?
How do I reset my Honda Odyssey?
Use your pliers or wrench to separate the positive end cable from the plug. Go into your car’s fuse box, and see the diagram. Pick the “ecm” fuse, and disable this fuse. … Keep the car truncated like this for two or three minutes to clear the memory of the machine.
What does the wrench light mean on Honda Odyssey?
Maintenance Minder™: A symbol shaped like a yellow wrench means your Odyssey is due for routine maintenance. Take it to a trusted service department, and the technicians will be able to reset it.
First, locate where your “SEL/RESET” button is located. On some models, it is a stem button on the display near the fuel gage. Other models have it on the steering wheel. Turn the ignition switch to “On“.
How do you turn off the maintenance required light on a Honda Odyssey 2020?
- Turn your ignition on but don’t start the car.
- Press the HOME button.
- Go to the 🔧 MAINTENANCE.
- Find and select OIL LIFE.
- Press and hold the ENTER button.
- Select the maintenance item to reset or select All Due Items.
How do you reset the maintenance light on a 2009 Honda Odyssey?
- Turn on the car without starting the engine.
- Press the Select/Reset knob repeatedly until the “Remaining Oil Life” appears on the display.
- Press and hold the Select/Reset knob.
- Release it and hold it again for 5 seconds.
How do you reset the tpms light on a 2010 Honda Odyssey?
To reset the tpms in a 2010 Honda Odyssey, look for the tpms button beneath the left side of the dashboard. Press and hold it until You see the low tire pressure/tpms light blink twice. After this, the calibration process will be finished once You drive about 20 minutes.