Go to SYSTEM SETTINGS and scroll down to RESET, as you can see in the photo below. NOTE: If you do a total reset, you’ll lose all your presets and memory for the radio, navigation, phone etc., so everything will need to be setup again from scratch.
Moreover, why is my Mercedes Bluetooth not working? Make sure that your Bluetooth accessory and iOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
Considering this, how do I turn on Bluetooth in Mercedes system settings?
- Turn on Bluetooth®* on your phone.
- Click on “TEL” and “Connect Dev” on your car’s display screen.
- Click “Search for Phone” or “Connect via Phone,” then press “Start”
- Wait for your Mercedes to find your phone, and click on your phone once it’s found.
Amazingly, can’t connect phone to Mercedes Bluetooth?
- Go to Settings on your phone.
- Find the Bluetooth setting and make sure it is on.
- Start your Mercedes-Benz vehicle, press the “TEL” key on the radio, then select “Phone”
- On the lower left of the screen, press “Connect Dev”
Beside above, how do I connect my Bluetooth to my Mercedes? To pair your Apple or Android device to your Mercedes-Benz, first go to your settings and confirm that Bluetooth® is on and the phone is discoverable. On the infotainment screen of your Mercedes, select the Phone icon and open the Device Manager, there should be a prompt to connect a new device.Turn the ignition key to the on (not start) position. Press the gas pedal to the floor and hold for five seconds. Turn the key to the “off” position (don’t remove the key), then release the gas pedal. Wait at least two minutes for ECU to reset .
How do I connect to Bluetooth?
- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh.
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
Why does my Mercedes say Bluetooth not activated in system settings?
Registered. Try deleting Mercedes Blue tooth off your phone and re pairing it to the vehicle. Try doing an external pairing on it !
Does 2005 Mercedes have Bluetooth?
All 2005 Mercedes-Benz C-Class model vehicles come standard with the Bluetooth Connectivity function.
What is the Mercedes-Benz Bluetooth pairing code?
How do you do pairing mode?
How do I connect my phone to my 2007 Mercedes?
How do I connect my Bluetooth to my 2014 Mercedes?
Why my Bluetooth is not connecting to my car?
Connect using Bluetooth Restart your device. Go to Settings > Bluetooth, and turn off Bluetooth. Wait for about 5 seconds, then turn Bluetooth back on. Check the manual that came with your car for more information on how to pair with a Bluetooth device.
How do I connect my iPhone to my Mercedes Bluetooth?
The first time you connect your iPhone, select “Connect” from the menu on your infotainment screen, then select “Automatically” on the following pop-up. Your iPhone is now connected your Mercedes-Benz Apple CarPlay system. Your primary iPhone will now automatically connect going forward.
What is passkey in Bluetooth?
A passkey (sometimes called a passcode or pairing code) is a number that associates one Bluetooth enabled device with another Bluetooth enabled device. For security reasons, most Bluetooth enabled devices require you to use a passkey.