Turn the ignition key to the on (not start) position. Press the gas pedal to the floor and hold for five seconds. Turn the key to the “off” position (don’t remove the key), then release the gas pedal. Wait at least two minutes for ECU to reset .
Likewise, how do I unlock my Mercedes radio?
- Visit your local authorized Mercedes-Benz dealer.
- Contact our Customer Assistance Center with your Vehicle Identification Number (VIN),
- Via phone: at 1-800-FOR-MERCEDES (1-800-367-6372)
Subsequently, why is my radio not working in my Mercedes Benz? If it isn’t just the radio that isn’t turning on the culprit may be a dead battery. Get some jumper cables and see if you can jump your car. However, if your car turns on but there isn’t any sound coming from the radio, it could also be: Bad speaker wires.
Furthermore, how do I reset my car radio without the code? Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.
Correspondingly, how do I restore my Mercedes to factory settings?
- Turn the ignition key to the on (not start) position.
- Press the gas pedal to the floor and hold for five seconds.
- Turn the key to the “off” position (don’t remove the key), then release the gas pedal.
- Wait at least two minutes for ECU to reset.
Contents
Can I get radio code from VIN number?
The code is located on a card that comes with the original purchase of the vehicle, which we don’t have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle and ask for the radio code.
How do I reset my Mercedes w204 radio?
How do I reset my Mercedes DAB radio?
Press and hold the ‘Menu’ button for three seconds. Push the ‘Tune’ button within 3 seconds to confirm the reset. A full reset will be performed and your station list will be updated. 4.
How do I reset my car radio?
Remove the faceplate from your car stereo. Press the RESET button on the front panel using a pointed object, such as a ball-point pen.
Will disconnecting battery reset radio?
If you have to disconnect the battery in your car, several important systems will lose power. You’ll need to reset the clock, for one thing. You’ll also need to enter the radio code for your audio system when you replace the battery.
How do I reset my Eurovox radio code?
If incorrect codes are entered for more than 3 times, your Eurovox overhead DVD/Screen unit will show “Code Input Error” on the display. Leave car key in the car and turn it to Accessories for approximated 1 hour, the overhead DVD/Screen unit will reset itself and shows”Security Input 1***” on the display.
What happens if I factory reset my Mercedes?
By re-setting to factory settings, it will just revert all “driver preferences” back to factory. Like the headlight settings, lighting settings etc. Nothing to panic about.
How do I reset my Mercedes Bluetooth?
Go to SYSTEM SETTINGS and scroll down to RESET, as you can see in the photo below. NOTE: If you do a total reset, you’ll lose all your presets and memory for the radio, navigation, phone etc., so everything will need to be setup again from scratch.
Where in the owner’s manual is the radio code?
Inside the owner’s manual, you’ll find an index located in the back, listed in alphabetical order. Simply look for radio, stereo, or security sections to see if this information is documented inside the manual.
Why does my radio say locked?
A lockout code protects against radio theft. If a thief disconnects the radio, the code locks the radio up, rendering it useless. However, it’s not much of a safeguard because the thief usually doesn’t know that the code has been tripped until he powers up the radio after he has removed it from the vehicle.