Make sure that your Bluetooth accessory and iOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
Additionally, how do I reset my Mercedes Bluetooth? Go to SYSTEM SETTINGS and scroll down to RESET, as you can see in the photo below. NOTE: If you do a total reset, you’ll lose all your presets and memory for the radio, navigation, phone etc., so everything will need to be setup again from scratch.
Also the question is, why did my Bluetooth stop working in my car? If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
Similarly, how do I turn on Bluetooth in Mercedes system settings?
- Turn on Bluetooth®* on your phone.
- Click on “TEL” and “Connect Dev” on your car’s display screen.
- Click “Search for Phone” or “Connect via Phone,” then press “Start”
- Wait for your Mercedes to find your phone, and click on your phone once it’s found.
Beside above, how do I turn on Bluetooth audio in my Mercedes? To get to the Bluetooth audio screen of your Mercedes-Benz hands-free system press the “DISC” key on the radio or select “Audio”. Select “Audio” again and select “Bluetooth audio” or press the “DISC” key several times until you see the following screen. Select “BT audio” located in the lower left corner.
- Go to Settings on your phone.
- Find the Bluetooth setting and make sure it is on.
- Start your Mercedes-Benz vehicle, press the “TEL” key on the radio, then select “Phone”
- On the lower left of the screen, press “Connect Dev”
Contents
Why is my Mercedes radio not working?
If it isn’t just the radio that isn’t turning on the culprit may be a dead battery. Get some jumper cables and see if you can jump your car. However, if your car turns on but there isn’t any sound coming from the radio, it could also be: Bad speaker wires.
What do you do if your Bluetooth won’t turn on?
- Turn your Android device off by holding down the Power button.
- Wait for several minutes and then turn your phone on again.
- Wait for your phone to completely power up, so you’re on the Main Menu.
- Navigate Settings > Bluetooth and then enable the setting.
How do I force a Bluetooth device to pair?
Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.
How do I reset my Bluetooth?
- Go to Settings -> System and tap the Advanced drop-down button.
- Select Reset options and then tap Reset Wi-Fi, mobile, & Bluetooth.
- Tap the Reset settings button below and enter your phone’s PIN when asked.
How do I connect my Bluetooth to my Mercedes?
- Press the phone button on your steering wheel, and the infotainment system will directly jump into the pairing menu.
- To connect, make sure your mobile device’s Bluetooth is visible, and the device list is visible during the complete pairing process.
How do I connect my phone to my Mercedes Bluetooth?
To pair your Apple or Android device to your Mercedes-Benz, first go to your settings and confirm that Bluetooth® is on and the phone is discoverable. On the infotainment screen of your Mercedes, select the Phone icon and open the Device Manager, there should be a prompt to connect a new device.
How do I connect to Bluetooth?
- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh.
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
How do I connect my iPhone 12 to my Mercedes Bluetooth?
The first time you connect your iPhone, select “Connect” from the menu on your infotainment screen, then select “Automatically” on the following pop-up. Your iPhone is now connected your Mercedes-Benz Apple CarPlay system. Your primary iPhone will now automatically connect going forward.
How do I reset my Mercedes sound system?
Turn the ignition key to the on (not start) position. Press the gas pedal to the floor and hold for five seconds. Turn the key to the “off” position (don’t remove the key), then release the gas pedal. Wait at least two minutes for ECU to reset .