If it isn’t just the radio that isn’t turning on the culprit may be a dead battery. Get some jumper cables and see if you can jump your car. However, if your car turns on but there isn’t any sound coming from the radio, it could also be: Bad speaker wires.
In this regard, how do I reset my Mercedes radio?
- Select Reset and press. to confirm. A prompt appears asking whether you wish to reset.
- Select Yes or No and press. to confirm. If you select No, the process will be aborted.
- Select Yes or No and press. to confirm. If you select Yes, a message will be shown.
Also know, how do I reset my Mercedes Comand system?
- Locate the fuse box on the side of the dash on driver’s side.
- Remove the fuse box cover.
- Locate fuse 26 and 28. Remove both fuses.
- Locate the fuse box on the rear.
- Remove the key from the ignition and let the car stay off for at least 15 min.
Subsequently, why has my car radio stopped working? Common reasons for this to happen: Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. … Damaged Antenna or Tuner: If the car’s CD player still works, but the radio itself doesn’t, then the problem most likely lies with either the antenna or the tuner.
Beside above, how do I turn on my Mercedes radio?
To do this, You have to turn your ignition to the ON position. Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes.How do I unlock my Mercedes radio code?
- Visit your local authorized Mercedes-Benz dealer.
- Contact our Customer Assistance Center with your Vehicle Identification Number (VIN),
- Via phone: at 1-800-FOR-MERCEDES (1-800-367-6372)
What does factory reset do on Mercedes?
By re-setting to factory settings, it will just revert all “driver preferences” back to factory. Like the headlight settings, lighting settings etc. Nothing to panic about.
How do you fix a car radio that won’t turn on?
- Common Car Radio Problems.
- Verify the Unit Isn’t in Protect Mode.
- Check the Fuses.
- Check the Pigtail Connector.
- Check for Power at the Head Unit.
- Check for Ground at the Head Unit.
- Bench Test the Head Unit and Replace if Needed.
How do you know if a radio fuse is blown?
Why has my DAB car radio stopped working?
This could be caused by a fault with the DAB radio itself, or failure to install the aerial properly. Here are some possible fixes: Try a factory reset – Look in the car manual or search Google to find out how to do a factory reset. … Otherwise, the DAB radio will not work properly.
How do I unlock my car radio?
Locate the anti-theft/unlock code. Most cars have a special anti-theft radio card that is included with the owners manual packet containing the unlock code and serial number. Some cars also have the code in the car manual or inside the glove compartment. You will need this code in order to unlock your car radio.
How do you turn on a radio in a Mercedes C Class?
On some ranges of Mercedes C-Class you will be able to: press the start button twice without pressing the brake pedal, this will allow your vehicle to be placed in intermediate operation before starting the engine to turn the radio on again.
How do you dab on a Mercedes?
On the centre Screen and Using the controller click on FM and DAB should be in there. to confirm.
How do I reset my car radio?
Remove the faceplate from your car stereo. Press the RESET button on the front panel using a pointed object, such as a ball-point pen.
Why does my radio not work after changing battery?
The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed. When that happens, all you have to do is enter the right car radio code, and you’re back in business.