Depress the “TRIP/RESET” button then select “OIL LIFE RESET.” The message display will show “HOLD RESET IF NEW OIL.”Press and hold the “TRIP/RESET” button for more than two seconds to reset the engine oil life. Once the procedure has been completed, “OIL LIFE SET TO 100%” will be displayed.
People ask also, how do you reset the oil light on a Ford Explorer? Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
Likewise, how do you reset the oil change light on a 2007 Ford Explorer?
Also, how do you reset the oil light on a 2005 Ford Explorer?
- Press the SETUP button repeatedly until “Press Reset At Oil Change” message is displayed.
- Press and release the RESET button to display “Hold Reset To Confirm”
- Press and hold the RESET button to see “Oil Life Set To 100%”
Also know, why is my change oil light on when I just changed my oil? The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.Press and hold the trip/reset button until the display reads “OIL LIFE SET TO 100%.” Turn the ignition to the “OFF” position. Start the engine and verify that the oil change required message is no longer displayed.
What does the wrench light mean on a 2007 Ford Explorer?
The wrench light on a 2007 Ford Explorer means that it is time for a service on the vehicle. Usually it will be something simple like an oil change, but could be more involved like a transmission fluid change. It is impertinent to always keep up on the maintenance with Your vehicle.
What does the wrench light mean on a 2006 Ford Explorer?
The 2006 Ford Explorer wrench indicator light means you have a concern in the fly by wire throttle actuation. You no longer have a cable, but a computer controls the throttle for speed opening or a trans concern. The most common problem is the throttle position sensor on the throttle body is bad.
How do you reset the service engine soon light on a 2004 Ford Explorer?
How do you reset the service engine light on a 2003 Ford Explorer?
How do you reset the change oil light on a 2003 Ford Explorer?
- Press “SETUP” to access the System Check function.
- Press and release “RESET” to display “OIL LIFE XX%”.
- Press and hold “RESET” for 2 seconds to display “IF NEW OIL HOLD RESET”.
- Press and hold “RESET” to display “OIL LIFE SET TO 100%”.
How do you reset after oil change?
Insert the key into the ignition and turn it to the “on” position without starting the engine. Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again.
Why does my oil light keep going on and off?
If the oil light flickers on and off while the vehicle is stopped or at an idle, there may be a problem with the oil sensor or the pressure is too low. … Check the oil level and add motor oil to the vehicle, if needed, and continue to monitor the light. If the oil was indeed low, the light should turn off.
Why is my oil light on but my oil is full?
When the oil light on your dashboard comes on, it might mean your vehicle has low oil pressure. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.
What does it mean when it says oil change required?
Your car is designed with an oil change reminder system. … However, if you go beyond the end of oil’s life, you’ll see a different warning, one that reads “Oil change required”. Once the oil life reaches 0%, this message is displayed and you should have your oil changed as soon as possible.
How do I reset my Ford car?
Press Settings on your vehicle’s SYNC screen. Choose General. Scroll down and press Master Reset. A message confirming that all system settings will be erased and reset to factory defaults will appear.