Locate the intake spout on the transmission, then insert a funnel if needed. Pour fluid into the vehicle until the dipstick show that it is full. Put the dipstick back, close the intake spout and you are finished.
Also, how do you fill a Ford Explorer transmission?
People ask also, does a 2004 Ford Explorer have a transmission dipstick? Our research indicates that your vehicle does not have a transmission fluid dipstick. In order to check the transmission fluid, your vehicle likely has check valve on the bottom of the transmission on the bottom of your car. …
Also know, how do you put transmission fluid in a 2005 Ford Explorer?
Likewise, where do you put transmission fluid in a Ford? Insert the tip of the transmission funnel into the tube. Add half a quart of transmission fluid. Wait a moment to allow the transmission fluid to drain down the tube, then repeat step 3. Repeat until the dipstick is continuously covered with transmission fluid up to the middle hole.In order to check the transmission fluid on a ford explorer, you must remove the cap and dipstick located at the front of the engine bay, while the engine is running, and then reinsert and remove the dipstick to measure fluid level and viscosity.
Contents
What type of transmission fluid goes in a ford explorer?
The ford explorer 5r55s transmission fluid type includes motorcraft mercon lv atf fluid for peak performance.
How do you check the transmission fluid on a 2004 Ford Explorer XLT?
What transmission does my 2004 Ford Explorer have?
The transmission type used by a 2004 ford explorer is 5 speed automatic.
How do you change a transmission filter on a 2004 Ford Explorer?
How do you add fluid to a sealed transmission?
How many quarts of transmission fluid do I need for a Ford Explorer?
The 2001 Ford Explorer takes 14 quarts of transmission fluid.
What are the symptoms of low transmission fluid?
- Warning light.
- Transmission overheating.
- Difficulty in shifting gears.
- Transmission fluid leakage.
- Generation of unusual sounds.
- Transmission slipping problems.
Do you leave the car running when adding transmission fluid?
Your car’s engine should be running when you add fluid to the transmission, but you should have the transmission in park and the handbrake activated for safety. Check the owner’s manual for instructions on selecting the correct transmission fluid for your vehicle.
Can you fill transmission fluid through dipstick?
The transmission itself is full of fluid that keeps everything running smoothly. … To avoid this, you can use the transmission fluid dipstick to monitor the level of fluid inside of the automatic transmission and, if necessary, add fluid to the transmission.
Does Ford recommend transmission flush?
Recommendations from Ford include a full flush rather than just a drain and replace. If you find that your car is slipping out of gear, it may be time for a transmission flush. … You can also check your Ford’s transmission fluid by checking the levels with the dipstick.