Ford Explorer

How to replace door ajar switch on 2003 ford explorer?

There is not an official way to disable the door ajar alarm on the Ford Explorer. What You can do is open the dash board of the car, and locate the module that controls it and pull it out. If this sounds like to much work You can also find the fuse that powers it and then pull it.

Also know, how do you remove the ajar switch on a 2002 Ford Explorer?

  1. Remove the plastic cover around the door handle.
  2. Lift up the door switch panel from the front and remove.
  3. Remove three screws holding the door panel in place.
  4. Lift the panel enough to reach the electrical connector to the outside mirror switch.

Likewise, how do you change a ajar switch on a 2003 Ford Expedition?

People ask also, how do you remove a door ajar light? Spray the WD-40 liberally, and open and close each door firmly a dozen times, to work the lubricant into the mechanisms. Apply more WD-40 and repeat. If the WD-40 fix does not turn off the light, we recommend having a mechanic take a look.

Also, how do you turn off the liftgate ajar on a Ford Explorer? Disable the plug on the back gate in order to disable the door ajar alarm on the ford explorer. If inaccessible, a module may be located beneath the dashboard.

Contents

How do you turn off the alarm on a Ford Explorer?

To reset the alarm on the Ford Explorer You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.

Where is the door ajar fuse on a 2002 Ford Explorer?

Find the fuse panel cover located under the steering column on your Explorer. Rotate the knob and pull down on it to open.

How do you turn the interior lights off in a Ford Explorer?

By default, interior lights illuminates when you open the door on Ford Explorer. You can’t turn them off, there is no button or switch to turn them off.

How do you test a door ajar switch?

Where is the ajar fuse on a 2003 expedition?

The 2003 Ford Expedition will have two fuse boxes in the vehicle. The first is going to be under the hood and near the battery. This one is not going to contain the door ajar fuse. The one You will want is the second fuse boxAnd it’s going to be under the dashboard.

How do you know if your car door switch is bad?

  1. Door lock functions intermittently.
  2. Broken door lock button or rocker.
  3. Door locks do not function.

How do you fix a door ajar light on a 2003 Ford Expedition?

How much does it cost to fix door ajar sensor?

How much does it cost to fix a car door sensor? According to the national average, new sensor replacement can start at anywhere from $150 – $200. With Puls, garage door cable replacement or repair starts at just $90.

Why does dome light stay on?

How do you fix a bad door sensor?

See also:   Why ford explorer wont start?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!