First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.
Also, how do I get my 2002 Ford Explorer out of theft mode? To begin, turn the key in the ignition as if You were trying to start the engine. The engine won’t start since the anti-theft system has been activated. Allow the key to fall back into the ON position so the dashboard lights and radio still work. Leave the key like this for at least 10 minutes.
Likewise, how do I reset my Ford anti theft? Turn the ignition to the off position and remove the second coded key from the ignition. After three seconds and before 20 seconds, insert the new uncoded key into the ignition. Turn the ignition to the on position and keep it on for at least 6 seconds. Remove the newly coded key from the ignition.
Subsequently, how do I bypass Ford anti-theft system? Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.
Correspondingly, how do I get my Ford out of security mode? You’ll need two progRammed keys to perform the reset. Put one into the ignition, and turn it to “ON”. Cycle it back to “OFF” and remove. Immediately insert the second key (within 5 seconds) and cycle it to “ON” and “OFF” as well.Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
How do I get my 2001 Ford Explorer out of theft mode?
Press the panic button one time. Now, go to the driver’s side of Your car, and get inside. Place Your physical key into the ignition key hole, and turn it to the on position three times in a 10 second period. Now, start the engine, and the anti-theft system should be reset.
Will disconnecting battery reset anti-theft?
One last thing you can try if your car alarm is going off and you can’t get it to stop, but you can get under the hood is to disconnect the battery. By unplugging the battery for a few minutes, it will also reset the computer. All you have to do is disconnect the positive or negative terminal and wait.
How do I get my Ford Focus out of anti-theft mode?
One way is to put the physical key in the lock, and then turn it to the unlock position. Do this, without moving it away from that unlock position for about 30 seconds. After that, You can unlock the car and start the engine. This will trigger a reset of the system.
How do I get my Mustang out of theft mode?
To reset the anti-theft on the vehicle You will need to first get into the vehicle and shut the doors. With the doors shut You want to put the key into the ignition slot and turn it on. Once You have turned it on You will then want to turn it back to the off position.
How do I permanently disable anti-theft system?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
How do you fix Anti-theft system?
- Step 1: Check your key fob battery.
- Step 2: Check your door lock cylinder.
- Step 3: Check that you are using the proper key to start your car.
- Step 1: Check for the anti-theft light.
- Step 2: Turn the ignition to the “on” position.
- Step 3: Check the anti-theft light again.
How do I get my Ford f150 out of theft mode?
- Turn off the ignition and check your doors – all of them have to be closed.
- Insert the key in the ignition and turn it to “On”.
- Triple-push the power door unlock button.
- Turn the key to “Off”.
- Push the power to unlock the button 3 times again.
How do I know if my anti theft system is bad?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.
How do I reset my Pats system?
To reset the pats system, turn on the ignition and hold reset for about 5 seconds until a word testt shows up. Then push reset repeatedly until it shows dtc and read the code if there is one. After done, turn the ignition off. It should reset automatically.
Can you disable passlock?
The Passlock system on a Vehicles is the anti-theft system. The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. … While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.