Moreover, how do you get the EKA code on Discovery 2? The EKA code is found on the security information card supplied with your vehicle. The code is 4 digits long. The EKA code IS NOT the code in the key fob. The grey plastic tag on the keys IS NOT the EKA code, it is the ignition key code.
Likewise, can you program a second key fob yourself? Depending on the age and model of your car, you may be able to program a replacement yourself. The procedure for do-it-yourself key fob programming can vary: Some automakers provide instructions in their owner’s manuals. Information can be found in many cases on the internet.
Beside above, how do I pair a new key fob?
Considering this, how do you reset a Land Rover key fob? Put the key in the driver door. Turn it to lock while pressing the lock pushbutton. Hold for 5 seconds. Turn to unlock, press unlock and hold 5 seconds.
Contents
How do I reset my Land Rover Smart Key?
Position the Smart key flat against the side of the steering column. There are markings on the steering column to help locate the correct position. While holding the Smart key in position, firmly press and hold the brake pedal. Press and release the engine START/STOP button.
How do I bypass my Land Rover Discovery Immobiliser?
What is a Nanocom?
Custom Remap for the TDV6 – EMS Flash File [NANOCOM] A custom VBF Remap file that can be programmed into the engine management using our diagnostic server based systems applicable to Discovery 3 / LR3 or Pre 2010 Range Rover Sport with a TDV6 Diesel Engine.
How do I find my Immobiliser code?
Immobiliser codes are available online using the Vehicle Identification Number VIN, Auto Locksmiths & Auto Electricians can use the Immobiliser Code, Emergency Key Access Code (EKA) or IMMO code to start your car or van.
How do I reprogram my key fob to another car?
- STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
- STEP 2-Press the lock button.
- STEP 3-Turn off the ignition.
- STEP 4-Repeat the process with other key fobs.
- STEP 5-Restart the process.
Can you have two key fobs?
Registered. Yeah both should carry, no issues. You will occasionally get an alert if one of you leaves the car for an errand. make sure you really do both have your fobs.
How do you program a keyless remote without the original?
- Replace the batteries inside the key fobs.
- Get inside the car.
- Turn on the ignition.
- Press the lock button on the remote key.
- Listen for a Lock Sound.
- Programming additional remotes.
- Turn off the ignition.
- Step out from your car and test the result.
Can you program a car key yourself?
You can’t, for example, take a remote for your old car and program it to your new car even if they are the same make and model. With newer cars, most likely you will not be able to program a new key yourself. You will have to visit a dealer or locksmith.
Why is my car not detecting my key fob?
Reasons your car won’t detect the key fob the battery inside the remote is dead. the remote itself is broken or no longer programmed to your car. the car battery is low. the keyless operation system is faulty.
How long does it take to reprogram a key fob?
Most dealers we contacted said key-fob programming typically takes just 15-30 minutes, and the whole process, including cutting the mechanical spare key, rarely takes longer than an hour. Going to the dealer doesn’t have to break the bank either, even if they handle everything for you.