How to reset service on land rover discovery?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Also the question Is, how do you reset the service light on a Land Rover Discovery 2018?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

Likewise, how do you reset the service indicator on a Land Rover Discovery 3?

Additionally, how do you reset a Land Rover Discovery?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

Considering this, how do you reset the service indicator on a Range Rover Sport?

How do you reset the maintenance light on a 2016 Range Rover?

How do you reset the lights on a Land Rover?

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

How do you reset the service light on a 2011 Range Rover?

How do you reset the service light or indicator on a Land Rover Freelander 2?

How do you service a Land Rover Discovery 3?

How do you reset the oil life on a 2006 Land Rover LR3?

1. Put the key fob into its slot.
2. Press and hold the TRIP reset button.
3. Turn the ignition key to the “ON” position without starting the engine.
4. Keep press the TRIP button until SERVICE indicator start flashing and wait until it stop flashing.

How do you reset the oil light on a 2007 Land Rover LR3?

1. Release the TRIP RESET button within 10 seconds of entering the reset mode, the information display will show “DIST” or “OIL”
2. Press the TRIP RESET button within 10 seconds of releasing it and hold for more than 5 seconds.

How do I get my Range Rover out of valet mode?

1. From the Home menu screen, select Valet.
2. Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
3. Valet mode activated is displayed to indicate that a PIN has been accepted.

How do you reset a Range Rover Evoque?

How do you put a Range Rover in service mode?