How to reset service required on range rover sport 2010?

1. Turn off the cars ignition.
2. Hold down the reset button on the dash board to zero the mileage.
3. Turn the cars ignition on, but do not start.
4. A menu will come up, like date/mileage.
5. Let go and then press the button again.
6. It will toggle through some options, then get to rst.

Also, how do you reset the service required on a Land Rover Range Rover HSE 2010?

1. Key on, engine OFF.
2. Open door.
3. Open bonnet (hood)
4. Depress the accelerator pedal simultaneously for ten seconds, release.
5. service interval is now reset.

People ask also, how do you clear the service required on a Range Rover Sport? Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

Also know, how do you reset the service light on a 2009 Range Rover?

Likewise, how do you reset the service light on a 2012 Range Rover Sport?

How do you reset the service light on a 2016 Range Rover Sport?

How do you reset a Range Rover?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

How do you reset the ECU on a Range Rover Sport?

How do I know when my Range Rover needs a service?

How do you reset the service interval on a Range Rover?

How do you reset the service light on a 2013 Range Rover Sport?

To reset this message, 1; open the hood, 2; turn the ignition on by pushing the start button with your foot off the brake, 3; push the brake pedal and accelerator pedal for 30 seconds, 4; let off the pedals and turn the ignition off. Close the hood and you are good to go.

How do you reset the service light on a 2015 Range Rover Sport?

How do you reset the check engine light on a 2011 Range Rover Sport?

1. Turn off your vehicle and put on the proper safety gloves and glasses.
2. Locate your battery under the hood and find the negative terminal.
3. Use a wrench to loosen the negative terminal connector.
4. Carefully hold it to the side for 30 to 60 seconds.

How do you reset the oil light on a 2014 Range Rover Sport?

1. Open the bonnet.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Open the driver’s door.
4. Hold the accelerator and brake pedals all the way down.
5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

How do you get to the service menu on a Range Rover Sport?