The Hill Descent Control System (HDC system for short) is a driver assistance program. The HDC system provides automatic navigation while descending down through rough terrain. When this system is engaged, the driver does not have to manually engage the brake during the descent.
Likewise, what is HDC fault on Range Rover Sport? 2019 Range Rover Sport. Do not attempt a steep descent if the Hill Descent Control (HDC) system is inoperative or warning messages are displayed. Doing so can potentially result in vehicle damage or personal injury. The HDC system restricts the vehicle’s speed to a set limit when traveling downhill.
Also, how do you turn off HDC on Range Rover? HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.
People also ask, what is Range Rover HDC? Land Rovers feature the HDC, which stands for Hill Descent Control system. … When the HDC is turned on, the vehicle will use the anti-lock braking system during descent to control the speed of each wheel on the vehicle. The driver can use cruise control to adjust the speed to a level that is comfortable.
Additionally, what is HDC switch? HDC is a low speed function with enhanced engine braking. The function makes it possible to increase or reduce the car’s speed on steep downhill gradients using only the accelerator pedal, without using the foot brake.Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.
What does vehicle lean when cornering mean?
You must stop the vehicle as soon as safety permits and switch off the engine. … If the warning icon is AMBER and accompanied by the message VEHICLE LEAN WHEN CORNERING, a fault that will result in reduced Dynamic Response performance has been detected.
How do you turn off Hill Descent?
To deactivate it, push the Hill Descent control button at the top left corner of the center information screen or increase speed to over 40 mph. The feature will also shut down when the vehicle’s ignition is switched off. To activate it, depress the button again.
How do you reset a Range Rover?
- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
How do you turn off the HDC on a 2012 Range Rover Evoque?
- Press to switch HDC on and off.
- Press to increase the set speed.
- Press to decrease the set speed.
What is Range Rover DSC?
2016 Range Rover Safety may be reduced by inappropriately disabling Dynamic Stability Control (DSC). … In some driving conditions, it may be appropriate to disable DSC to improve traction. These conditions include: Rocking the vehicle out of a hollow or deep rut. Pulling away in deep snow, or on a loose surface.
What does gearbox fault mean on a Range Rover?
The gearbox fault message is often triggered by insufficient battery voltage. It’s a strange sort of Land Rover code – you know, gearbox fault REALLY means battery bad.
How do I turn off ATPC?
Press and release the ATPC button again to disable the system. The button’s LED lamp and the ATPC warning lamp extinguish to confirm. The message center also displays an ATPC off confirmation message. ATPC operation is influenced by the current terrain response driving program selection.
The HDC button is located on the centre console. The speed limits for the HDC system are adjusted via the control buttons mounted on the right side of the steering wheel. Dependent on the vehicle’s specification, the HDC button also operates the All Terrain Progress Control (ATPC) system.
What does HDC mean in car?
Hill descent control (HDC, or hill mode descent control) is a driver-assistance system. It allows a controlled hill descent in rough terrain without any brake input from the driver.
Available Hill Descent Control is essentially a cruise control system that uses traction control technology with anti-lock brakes. This system continually adjusts braking pressure to help control slippage and maintain a constant preset speed while you are going down a steep grade.