First, turn the car on. Next, put the car in Neutral. Lift the EPB button. The Park on the dash should flash and disappear.
Furthermore, how do you remove the parking brake on a Range Rover?
People also ask, how do you reset the EPB on a Range Rover Sport? If the battery has been discharged or disconnected, Apply Foot And Park Brake will be displayed in the Message center when the ignition is next switched on. Press the brake pedal and pull the EPB switch up to apply the EPB. This is required to reset the EPB system. The EPB will now function correctly.
Additionally, how do you turn the parking brake off on a Range Rover Sport? The EPB switch is located on the centre console. Operate as follows: With the ignition switched on, press the brake pedal and press down on the EPB switch, to release the EPB. Pull the EPB switch up and release it, to apply the EPB.
Likewise, can you disable electronic parking brake? You only need to disable the electric parking brake before changing the rear brake pads. Doing so will switch off the actuators. To disable the electric parking brake, you need to activate the parking brake service mode.
Contents
Where is the EPB switch?
The EPB switch is located on the center console. Operate as follows: With the ignition switched on, press the brake pedal and press down on the EPB switch, to release the EPB. Pull the EPB switch up and release it, to apply the EPB.
How do you manually release the parking brake on a Range Rover?
How do you release a parking brake manually?
To release the parking brake, press and hold the standard brake pedal, then depress the parking brake pedal until you feel the pedal release. Slowly pull your foot on the parking brake pedal.
How do you manually release handbrake on a Range Rover Sport?
What is EPB reset?
EPB Reset Resets the cable if the Emergency release cable has been activated. EPB Un-jam Allows the EPB to be un-jammed when the vehicle has entered a state where the brakes screech when applying the Parking Brake, the rear brakes squeak or rub when the vehicle is moving or there is evidence of shoe-drag.
How do I get my Range Rover Evoque out of service mode?
What is HDC fault system not available?
A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.
Where is the handbrake on a Range Rover Sport?
On Discovery 3 and 4 and Range Rover Sport 1 models the electronic park brake system comprises four main parts: the driver’s switch in the cab, the brake module mounted in the centre of the chassis infront of the spare wheel, the cables that run from the module to the wheel brakes to operate them, and the brakes …
How do you lift a Range Rover with air suspension?
Up button: Press and release to raise the suspension height. If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height.
What is Range Rover service mode?
The Service Mode and Transport Mode can be enabled and disabled by using the Land Rover InControl Remote Smartphone App, or via the InControl website. The service and transport mode actions prevent stolen vehicle tracking alerts being raised while the vehicle is being transported or serviced.