Range Rover

How to reset maintenance light on 2016 range rover?

Also know, how do you reset the service light on a 2015 Range Rover Sport?

Likewise, how do you turn the service light off on a Range Rover Sport?

People ask also, how do you reset the service light on a 2015 Range Rover Evoque?

Also, how do you reset the service light on a 2014 Range Rover?

  1. Open the bonnet.
  2. Turn the ignition key to the “ON” position without starting the engine.
  3. Open the driver’s door.
  4. Hold the accelerator and brake pedals all the way down.
  5. Turn the ignition OFF and start the engine to verify the indicator has been reset.

Contents

How do you reset the service light on a Range Rover?

Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.

How do I reset my Range Rover dashboard?

  1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
  2. The device will power down and then automatically reboot.
  3. Device will now power on, perform and charge as expected.

How do you get to the service menu on a Range Rover Sport?

How do you reset the service light on a Range Rover Evoque?

How do you reset the service light on a Range Rover Evoque 2018?

What does it mean when the service indicator light is on?

The service required light is mainly used to remind drivers when it is time to change the oil and filter, but could be used for other fluids or components. In the past, this light was similar to the check engine light and could mean that a fault has been detected by the system.

How do you reset the service light on a 2012 Range Rover?

How do you reset the service light on a Land Rover Discovery 2017?

How do you check the oil on a 2016 Range Rover?

  1. Switch on the ignition (do not start the engine). See SWITCHING ON THE IGNITION.
  2. Make sure Park (P) is selected.
  3. Select Service Menu or Vehicle Information via the Instrument panel menu (see INSTRUMENT PANEL MENU).
  4. Select Oil Level.
  5. Top up, as instructed.

What is Range Rover service mode?

The Service Mode and Transport Mode can be enabled and disabled by using the Land Rover InControl Remote Smartphone App, or via the InControl website. The service and transport mode actions prevent stolen vehicle tracking alerts being raised while the vehicle is being transported or serviced.

See also:   How much latest range rover?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to see the content of the page. For an independent site with free content, it is literally a matter of life and death to have ads. Thank you for your understanding!