- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
People ask also, how do you fix a frozen screen on a Range Rover? Shut the vehicle off and lock the doors until you see the illuminated red hazard light go off. This is an indication that the vehicle is asleep. Once the light goes off unlock and restart your vehicle and everything should be working fine again.
Also know, how do I reset my Range Rover 2020?
Likewise, how do I get my Range Rover out of valet mode?
- From the Home menu screen, select Valet.
- Enter a memorable 4 digit PIN. You will be prompted to confirm the PIN. If you wish to cancel the PIN, select Delete.
- Valet mode activated is displayed to indicate that a PIN has been accepted.
Also, how do you reset the ECU on a Range Rover Sport?
Turn the ignition to “on” without igniting your engine (if you have push-button start, press your button once without touching the brake pedal. Open the driver’s door. Depress and hold the gas and brake pedals for 60 seconds. Then turn the ignition to “off” and verify that the light has been reset.Contents
How do you reset the service indicator on a Range Rover Evoque?
How do you reset the check engine light on a Range Rover?
- Turn off your vehicle and put on the proper safety gloves and glasses.
- Locate your battery under the hood and find the negative terminal.
- Use a wrench to loosen the negative terminal connector.
- Carefully hold it to the side for 30 to 60 seconds.
What is valet mode?
Valet mode is a safety convenience feature standard on all Arctic Start remote start and security systems. Valet mode disables all system features other than lock or unlock; such as, remote start, alarm triggers, and trunk release.
What is stealth mode on a Range Rover?
Stealth mode lowers the level of interior illumination to aid with night time driving. Stealth mode can be enabled through the touchscreen’s Screensaver menu. See GENERAL SETTINGS. Once enabled, stealth mode is activated by switching the touch screen off, using the on and off button.
What is Range Rover Guardian mode?
Guardian Mode will monitor your Land Rover and provide alerts via your smartphone if any interference occurs. This includes doors being unlocked, the engine being started or if the vehicle is moved without your permission, meaning that you can rest assured that any interference will be picked up.
How do I reset my ECU?
How do you clear the code on a Range Rover?
- use a code reader.
- disconnect the battery leads for a couple minutes.
- cycle the key on and off more than 40 times. Note, this one requires the problems to be fixed before it worksthe other 2 ways do not, although the codes will return in 2 trips, otherwise.
What is HDC fault?
HDC is sensitive to differences in voltage across the vehicle’s electrical systems. … If you see the “HDC Fault System Not Available” message while the brake warning light or ABS warning light are illuminated, this can indicate a failure in any or all of these systems.