HDC icon: Touch and briefly hold to enable the HDC system. The instrument panel displays a confirmation message and illuminates the HDC warning lamp to confirm selection. Touch and briefly hold the icon again to disable the HDC system.
Additionally, how do you turn off Hill Descent? To deactivate it, push the Hill Descent control button at the top left corner of the center information screen or increase speed to over 40 mph. The feature will also shut down when the vehicle’s ignition is switched off. To activate it, depress the button again.
Similarly, where is the HDC button? The HDC button is located on the centre console. The speed limits for the HDC system are adjusted via the control buttons mounted on the right side of the steering wheel. Dependent on the vehicle’s specification, the HDC button also operates the All Terrain Progress Control (ATPC) system.
Also, how do you turn off the HDC on a 2012 Range Rover Evoque?
- Press to switch HDC on and off.
- Press to increase the set speed.
- Press to decrease the set speed.
Beside above, how does Hill Descent Control Work Land Rover? Hill Descent Control reduces the wasted braking potential by changing braking pressure to each wheel, which means each is then braked to its traction limit. The driver sets a descent speed, and the computers take care of the rest. The speed of the car is calculated from averaging the speeds of each of the four wheels.Hill Descent Control FAULT. Displays when a hill descent system fault is present. Hill Descent Control OFF System Cooling. Displays when hill descent control mode disables to cool the brake system.
Available Hill Descent Control is essentially a cruise control system that uses traction control technology with anti-lock brakes. This system continually adjusts braking pressure to help control slippage and maintain a constant preset speed while you are going down a steep grade.
Does Hill need Descent Control?
Hill Descent Control helps your vehicle maintain a set speed as you drive downhill on an incline. … This is especially useful for off-road driving, where the ground can be uneven, and gaining speed on a slope can be dangerous.
What is Hill Hold and Hill Descent Control?
The way Hill Descent works is similar to that of traction control and electronic stability control. Like those systems, Hill Descent Control communicates with ABS hardware to apply the brakes without any input from the driver. … To use the system, the driver must first approach an incline at a slow speed.
What is Range Rover HDC?
Land Rovers feature the HDC, which stands for Hill Descent Control system. … When the HDC is turned on, the vehicle will use the anti-lock braking system during descent to control the speed of each wheel on the vehicle. The driver can use cruise control to adjust the speed to a level that is comfortable.
What does HDC inactive mean on a Range Rover?
A message that says “HDC System Not Available” means that your HDC system is failing. … Causes of HDC failure can usually be connected with other mechanical issues in your vehicle. One issue could be a battery problem. The HDC system requires a well-charged vehicle battery to startup the system upon ignition.
What is DSC Land Rover?
DSC Failure in a Land Rover Your vehicle’s DSC system, which stands for the Dynamic Stability Control system, is designed to correct and helps to counteract oversteer, understeer, and a variety of other undesirable inputs to your vehicle’s handling characteristics.
What vehicles have Hill Descent Control?
- Alfa Romeo (Stelvio)
- Aston Martin (DBX)
- Audi (A4 Allroad, A6 Allroad, E-Tron, Q3, Q5, Q7, Q8)
- Bentley (Bentayga)
- BMW (X1, X2, X3, X4, X5, X6, X7)
- Chevrolet (Colorado, Tahoe, Silverado, Suburban)
- Ford (Explorer, Expedition, F-150, Super Duty)
- Genesis (GV80)
What does the hill descent light mean?
If the hill descent control indicator light is ON steadily, the system is ON and engaged, controlling vehicle speed. If the hill descent control indicator light is blinking, the system is ON, but not engaged, not controlling vehicle speed.
How do I turn off Ford Hill Start Assist?
If You want to disable the hill start assiSTSystem in Your Ford Escape You will need to go to the driver assist menu on the driver’s information center. From there You will want to go to the menu and scroll down until You reach the hill start assist option and You can turn that off.
How do I turn off Hill Descent Control Ford Explorer?
If You do not like the system being on then You can disable it easily. All You need to do is go to the main menu on the dash using the buttons on Your steering wheel. In this menu go to driver assist, then scroll downt o hill assist. From there press enter to turn it on or off and that will enable or disable it.