If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height. If a door is open, press and hold to lower the suspension height.
Also know, how do I disconnect my air suspension?
Likewise, how do you turn off air suspension on a Land Rover LR3? The air suspension in the Land Rover LR3 is enabled though a compressor but is not a feature that can be switched off. The LR3 does not come equipped with a switch to dis-engage the air suspension.
Considering this, how do you depressurize a Range Rover air suspension?
Additionally, can you drive Range Rover air suspension inactive? As long as your car is in the normal – height ride mode you can drive for ever and ever if you haven’t got a leak in your air susp.
Contents
What happens when you turn off air suspension?
For most vehicles, the air suspension should stay inflated once the compressor is powered off or deactivated. … If the system does not stay inflated, then there is likely a leak in the system that needs to be addressed, or it is not a type of system that will hold air without a functioning compressor.
Can you lift a Range Rover?
The Land Rover Discovery also offers an electronic air suspension as an upgrade, which means you can change the ride height while driving with the push of a button. … The Off-Road 2 setting lifts the Discovery 75mm (2.95 inches) above normal height. Above speeds of 50 mph, the suspension will go back to normal height.
How do you fix a suspension on a Range Rover?
How do you jack up a car with air suspension?
Just jack it up like normal from ride height. Of course, you can air up higher if you need the clearance. If you’re doing any suspension work, dump the pressure once it’s on jack stands.
How do you use the air suspension on a Range Rover?
- Up button: Press to raise the suspension height.
- Down button: Press to lower the suspension height.
- Off-road height indicator lamp: Illuminates when the suspension is set to off-road height.
- Normal height indicator lamp: Illuminates when the suspension is set to normal height.
How do you unlock a Range Rover suspension?
See ELECTRONIC AIR SUSPENSION CONTROLS. The locked access height indicator lamp illuminates on the suspension system controls. The instrument panel displays a confirmation message. To manually cancel locked access height, press the up button (1) for longer than 1 second.
How do you reset a Range Rover?
- To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
- The device will power down and then automatically reboot.
- Device will now power on, perform and charge as expected.
What does air suspension inactive mean on a Range Rover?
The reason it went up when they cleared the code is because they reactivated the system and the compressor filled the system… For it to just sink and throw the inactive message up minutes after the codes were cleared means there is something physically wrong, the system is losing air.
How much does it cost to fix air suspension on a Range Rover?
Land Rover Range Rover Sport Active Suspension Air Spring Replacement Cost Estimate. Labor costs are estimated between $226 and $286 while parts are priced at $1,544.
Can you drive a Range Rover with suspension fault?
Owning a Land Rover with Air Suspension is a smooth and comfortable ride until this Suspension Fault message appears. … This message does mean the electronic air suspension has stored a suspension fault but you can still drive normally on the freeway and surface streets.