Secure your Elantra with jack stands or wheel blocks. Crawl under the front of your car using a dolly or on your own. Find the oil drain plug on the bottom of your oil pan underneath your engine. You can use your vehicle owner’s manual to find its exact location under your car.
Contents
How do I add oil to my engine?
Remove the fill cap and place the small end of the funnel into the fill hole. Add oil by pouring in roughly a quarter of the container at a time, waiting a minute for the oil to drain to the pan, then repeating steps 2 and 3 each time. Stop adding oil when the dipstick shows oil at or just below the “MAX” mark.
What is the proper way to put oil in?
How much oil do you put in a Hyundai Elantra?
Pour in the specified amount of new oil. This should be about 4.2 quarts for the Hyundai Elantra, but you can find the exact amount in your owner’s manual. Replace the cap to your oil well. Check the oil level by using the dipstick.
How often does a Hyundai Elantra need an oil change?
Hyundai recommends getting your Hyundai Elantra oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed every 7,500 – 10,000 miles.
What kind of oil goes in a Hyundai Elantra?
Hyundai Elantra Recommended Oil Types 5W-30. 5W-20.
Can I just add oil to my car?
If you just add oil to your car’s engine periodically, that’s far better than letting your car run out of oil, but you’re still going to create a lot of problems if that’s all you do. … If that’s the case, you’re likely keeping the same oil filter in the engine, too. So that’s never being replaced.
How do I know if my car needs more oil?
If the top of the oil streak is between the min and max marks, the level is fine. If the level is below halfway between the marks, then we would recommend adding some oil. If it’s close to or even below the minimum mark, then you definitely need to add some oil.
How do you know when your car is low on oil?
- Oil pressure warning light.
- Burning oil smell.
- Strange noises.
- Weaker performance.
- Overheating Engine.
How much oil should I add if it’s low?
If the level of the oil is between the two lines, your vehicle has enough oil. If it’s at the low mark or below, it’s time to add a quart.
How long do I wait to check my oil after adding oil?
Immediately after driving, the oil level will appear lower, making it easier to overfill the oil. If you want to check the oil and have been driving the vehicle, wait five or ten minutes to let it settle into the oil pan before checking it.
Where should the oil be on the dipstick?
At the base of the dipstick, there are two marks or small holes indicating the high and low levels of engine oil. The oil level should be between these two marks. Both too high and too low are bad for the car.
How much oil does a 2.0 Hyundai Elantra take?
SAE 5W-20 is preferred. Capacity: 4.2 quarts. . . . (with filter)After refill check oil level.
How much oil does a Hyundai need?
Most engines require anywhere between 5 to 8 quarts of oil. For example, a 4-cylinder engine will require at least 5 quarts of oil and a 6-cylinder engine will require around 6 quarts of motor oil. Give Nalley Hyundai a call today and ask for one of our service advisers for more information.
How much oil does a 2008 Hyundai Elantra take?
The 2008 Hyundai Elantra oil capacity is 4.0 liters (4.23 US Quarts). For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W20,5W-30 (API SJ, SL / ILSAC GF-3 or above).