Stick the key to your Hyundai into the vehicle’s ignition cylinder. Turn the key to the “ACC” or “Accessory” ignition position. Hold down the “Open” or “Unlock” button on the keyless entry FOB until the vehicle’s lights flash. The keyless entry FOB is now reprogrammed to your Hyundai vehicle.
Another frequent question is, can I program my own Hyundai key fob? If you are purchasing a new Hyundai, you will need to visit a Hyundai service center to have an expert technician program the key fob to your vehicle instead. Reprogramming your Hyundai‘s key fob is relatively simple, but the experts at our dealership are always here to assist if you have questions or need help.
Additionally, can you program a new key fob yourself? DIY Key Fob Programming Depending on the age and model of your car, you may be able to program a replacement yourself. The procedure for do-it-yourself key fob programming can vary: Some automakers provide instructions in their owner’s manuals. Information can be found in many cases on the internet.
Furthermore, how do you program a key fob for a 2017 Hyundai Sonata?
Also know, how do you program a key fob for a 2015 Hyundai Sonata?
We paid just $79.95 for an official Hyundai fob (replete with Hyundai logo on the back), versus the $236.45 the dealer would have charged us. The caveat was that this advanced “smart” key fob needed to be programmed by a dealer or locksmith.Contents
How do I find my Hyundai key code?
Vehicle PIN code can be obtained through www.PATSCode.com service or through Hyundai dealer. – Key coding procedure is available in control unit IMMO – Immobilizer from “ECU Programming/Coding” menu.
How do locksmiths program key fobs?
- STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
- STEP 2-Press the lock button.
- STEP 3-Turn off the ignition.
- STEP 4-Repeat the process with other key fobs.
- STEP 5-Restart the process.
How do dealers program key fobs?
All key fobs need to be programmed. Some dealerships will do it for free, while others will charge a half-hour to an hour of labor. But there is a way around this fee. Most key fobs can be programmed with a specific combination of button presses on the remote and key turns in the ignition.
How do you reset a key fob?
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.
How do you program a key fob for a 2006 Hyundai Sonata?
How do you program a key fob for a 2005 Hyundai Sonata?
How do you program a push start key fob?
How do you start a 2015 Hyundai Sonata without a key fob?
How do I get my Hyundai Blue Link?
If your Hyundai is equipped with Bluelink, you can enroll at any time. Simply register or log in on the owner’s portal at owners.hyundaiusa.com, and click to enroll in Bluelink. You’ll just need your VIN (vehicle identification number located on the driver’s side dashboard) and a credit card.
Why is my key fob not working after battery change?
While there are a few reasons that a keyless entry remote might stop working, most of them are pretty easy to check yourself. The most common problem with these car key fobs is that the batteries go dead over time, in which case replacing the battery should fix the problem.