Operate as follows: With the ignition switched on, press the brake pedal and press down on the EPB switch, to release the EPB. Pull the EPB switch up and release it, to apply the EPB. The Electric Parking Brake (EPB) warning lamp illuminates to confirm.
Also know, how do you unlock the handbrake on a Range Rover?
Likewise, where is handbrake on Evoque? The parking brake operates on the rear wheels. Therefore, secure parking of the vehicle is dependent on being on a hard and stable surface.
Additionally, how does handbrake work on Evoque? If the EPB is applied while the vehicle is stationary and Drive (D) or Reverse (R) is selected, pressing the accelerator pedal will automatically release the EPB. The EPB is also automatically released when the gear selector is moved from the Park (P) position.
Furthermore, how do you manually release handbrake on a Range Rover Sport?
Contents
How do you release the handbrake on a Range Rover Sport?
On the Range Rover Sport the EPB lever needs to be removed by unscrewing 2 screws. Inside the console there is a wire cable loop, pulling this will release the parking brake.
How do you release a parking brake manually?
To release the parking brake, press and hold the standard brake pedal, then depress the parking brake pedal until you feel the pedal release. Slowly pull your foot on the parking brake pedal.
How do you override an electronic handbrake?
Where is the handbrake on a Range Rover Sport?
On Discovery 3 and 4 and Range Rover Sport 1 models the electronic park brake system comprises four main parts: the driver’s switch in the cab, the brake module mounted in the centre of the chassis infront of the spare wheel, the cables that run from the module to the wheel brakes to operate them, and the brakes …
Does Range Rover Evoque have automatic handbrake?
Range Rover Evoque: Epb automatic use EPB will be applied automatically if the ignition is switched off and the vehicle speed is below 3km/h (2mph). To prevent automatic operation, when the vehicle is stationary, press and hold the EPB switch in the release position.
How do you lift a Range Rover with air suspension?
Up button: Press and release to raise the suspension height. If a door is open, press and hold to raise the suspension height. The button’s LED indicator lamp illuminates during suspension height adjustment and extinguishes when complete. Down button: Press and release to lower the suspension height.
How do you change the rear brake pads on a Range Rover Evoque?
What is Range Rover service mode?
The Service Mode and Transport Mode can be enabled and disabled by using the Land Rover InControl Remote Smartphone App, or via the InControl website. The service and transport mode actions prevent stolen vehicle tracking alerts being raised while the vehicle is being transported or serviced.
How do I disable EPB?
- Switch the ignition ON.
- Turn off the AUTOHOLD.
- Switch the ignition OFF with the EPB switch pressed. When the auto operation is canceled, a sound is activated one time, and the EPB switch indicator light from normal flashing to faster flashing, and then turns off after 3 seconds.