Turn your ignition on and press the radio power button. Your radio will display “LOC.” Step 2: Enter the first two digits of the radio unlock code. Press the hour button on the radio to enter the first two numbers of your radio unlock code.15 jui. 2016
Contents
How do you unlock a locked Chevy radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How do you take theft lock off radio?
1. Use an original key (not a copied one) and insert it into the ignition.
2. Turn the key into the “On” position.
3. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
4. Flip the key into the “Off” position and leave it there for five seconds.
How do I bypass Theftlock on a GM radio?
1. Write down the user or factory back-up code.
2. Turn the ignition to ACCESSORY or RUN.
3. Turn the radio OFF.
4. Press the 1 and 4 buttons together.
5. Press the Minute button and “000” will appear on the display.
How do I unlock my radio?
1. Locate the anti-theft/unlock code. Most cars have a special anti-theft radio card that is included with the owners manual packet containing the unlock code and serial number.
2. Turn the car’s ignition switch to the “on” position. This turns on your car’s electrical system and powers up the radio.
How can I get the code to unlock my car stereo?
1. Check Your Owner’s Manual. The best place to locate a radio code is in the owner’s manual of your car.
2. Visit the Manufacturer’s Website.
3. Visit your Local Dealership.
4. Contact a Local Automotive Audio Installation Center.
How do I unlock my radio without the code?
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.9 jui. 2021
How can I get the code for my car radio for free?
Some makes are free! You can get the activation code for your car radio using the serial number that identifies the audio unit. You can find this number stamped on the side of the radio box. See details on the page of your car brand.
How do I unlock my RDS radio?
To unlock radio you will need access to a GM scan tool. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds.
How do I get my car out of anti-theft mode?
To deactivate the anti-theft system use the unlock button on the remote key. Unlock the driver’s door using the key and then switch the ignition switch to the on position. If that doesn’t work exit the vehicle and roll up all windows, then use the key to lock the driver’s door.26 oct. 2019
How do I turn off anti-theft system?
How do I unlock my Ford radio without the code?
Press and hold buttons 1 & 6 together. The radio will go through a series of information on the display, the ONLY information that will be your serial will begin “M” or “V” followed by 6 digits. If nothing shows doing this move onto the next step, this is pressing and holding down buttons 2 & 6.9 avr. 2021
How do you reprogram a GM radio?
1. Turn on your car.
2. Press and hold down both the second and third preset buttons.
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display.
How do I unlock my 2013 Chevy Impala radio?
1. Start the engine of the GM vehicle.
2. Place the vehicle in “Park.”
3. Press the “Power” button on the navigation system and press the “NAV” hard key, located at the top left side menu of the system.
4. Touch “Insert Map Disk” located on the center top portion of the touchscreen.