Be ready with a pen and paper to write down your radio unlock code. Step 1: Contact the GM radio hotline. From any landline or cell phone, call the toll-free GM Radio hotline at 1(800) 537-5140. Step 2: Enter the code.15 jui. 2016
Contents
How do you unlock a locked Chevy radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How do you take theft lock off radio?
1. Use an original key (not a copied one) and insert it into the ignition.
2. Turn the key into the “On” position.
3. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
4. Flip the key into the “Off” position and leave it there for five seconds.
How do I bypass Theftlock on a GM radio?
1. Write down the user or factory back-up code.
2. Turn the ignition to ACCESSORY or RUN.
3. Turn the radio OFF.
4. Press the 1 and 4 buttons together.
5. Press the Minute button and “000” will appear on the display.
How do I unlock my car radio without the code?
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.9 jui. 2021
How do I unlock my radio?
1. Locate the anti-theft/unlock code. Most cars have a special anti-theft radio card that is included with the owners manual packet containing the unlock code and serial number.
2. Turn the car’s ignition switch to the “on” position. This turns on your car’s electrical system and powers up the radio.
How much does it cost to unlock GM radio?
They usually charge a small (around $10) fee. Step 5: Start your vehicle and turn on the radio. Press the Hour button on the radio until the first two number of the code appear.
How do you reprogram a GM radio?
1. Turn on your car.
2. Press and hold down both the second and third preset buttons.
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display.
How do I unlock my 2013 GM radio?
To unlock the radio in the 2013 Chevy Silverado You will start by turning on the vehicle. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.
How do I get my car out of anti-theft mode?
To deactivate the anti-theft system use the unlock button on the remote key. Unlock the driver’s door using the key and then switch the ignition switch to the on position. If that doesn’t work exit the vehicle and roll up all windows, then use the key to lock the driver’s door.26 oct. 2019
How do I turn off anti-theft system?
How do you bypass a car alarm?
​Combination Of The Car Door and Key Insert your car key on the driver’s door and turn to disable the system without taking the keys out. The key should be in the keyhole for 30 seconds. The car would detect that you are the owner and allow you to bypass the alarm system.
How do I unlock my GM touch screen radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.31 mar. 2020
1. Start the engine of the GM vehicle.
2. Place the vehicle in “Park.”
3. Press the “Power” button on the navigation system and press the “NAV” hard key, located at the top left side menu of the system.
4. Touch “Insert Map Disk” located on the center top portion of the touchscreen.
How do I unlock my 2007 GM radio?
Press and hold the 5th preset button as you simultaneously press and hold the seek (forward) and power buttons on your radio. You must press and hold all three buttons simultaneously for this step to work. Try again if the radio does not immediately power on.3 jui. 2015