To turn the system off: With the light switch is in AUTO, pull the lever toward you and hold it for at least 40 seconds. After the auto high-beam indicator light blinks twice, release the lever.
Contents
How do I turn off IntelliBeam?
IntelliBeam can be disabled by the High/Low-Beam Changer or the Flash-to-Pass feature. If this happens, the High/Low-Beam Changer must be activated two times within five seconds to reactivate the IntelliBeam system. The instrument cluster light will come on to indicate the IntelliBeam is reactivated.
How do you turn on the headlights on a 2020 Chevy Equinox?
What is automatic high beam?
AUTOMATIC HIGH BEAM (AHB) AHB responds to the headlights of other drivers and dips automatically when needed, before restoring high beam when the road is clear. Using a built-in camera, AHB reacts to what your eyes may not immediately detect.
Why does my high beam light stay on?
From your description it certainly sounds like your headlights are out of aim/alignment. Check power and ground connections for high beams that act as low beams, high resistance on either can cause that condition.
Can you drive with high beams?
If you are driving with your high-beam lights on, you must dim them at least 500 ft from any oncoming vehicle, so you don’t blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following. Consult your state’s Drivers Handbook for details.
How do I know if I have IntelliBeam?
Once you’ve enabled IntelliBeam and the low beam headlamps are on, a Green “A” icon will display on your instrument panel. The feature will then turn the high beams on and off depending on vehicle speed, lighting conditions and other vehicles it detects.
How do I enable IntelliBeam?
IntelliBeam system is enabled. To enable the automatic IntelliBeam system, place the turn signal lever in the neutral position, then turn the exterior lamp control to AUTO. The blue high-beam on light will appear on the instrument cluster when the high beams are on.
How do you turn off the automatic lights on a Chevy Traverse?
You can use the DOME OVERRIDE button, located. below the exterior lamp control, to set the dome lamps. to come on automatically when a door is opened, or to. remain off. To turn the lamps off, press the button in.13 avr. 2020
How do you turn the lights off in a Chevy Equinox?
The dome lamps can also be turned on and off by pressing the buttons next to the lamps. The reading lamps are located on the overhead console. These lamps come on automatically when any door is opened. For manual operation, press the button next to each lamp to turn it on or off.
Does 2020 Equinox have led headlights?
As mentioned, the LT trim is home to the best headlights offered on the Equinox, per IIHS testing. Yes, it bests the range-topping Premier trim’s Marginal-rated LED headlights with HID projectors instead.3 déc. 2019
How do you turn the lights on a Chevy Equinox?
Are automatic high beams good?
Adaptive driving beams provide high brightness around other vehicles, but low brightness directly on them, which maximizes visibility without dazzling other drivers. Some systems are better than others at reducing glare for oncoming traffic.26 mai 2020
How do you use an automatic high beam?
Are automatic headlights always on?
Cars with automatic headlights can be turned on or off manually by the driver with the car’s controls if they choose. But if the driver selects the headlights to run as automatic like default (this setting is usually marked as ‘auto’), then they should be quick and smart enough to take care of this job for the driver.14 nov. 2016