1. Find the OIL LIFE RESET by pressing the INFO button repeatedly.
2. Press and hold the ⏎ button until the ACKNOWLEDGED displayed.
3. At this point, you know you’ve got it done. Just to double-check it just turn the key off and then start the car to confirm that oil life is reset.
Contents
How do you reset the oil life on a 2014 Chevy Malibu?
How do you reset the oil life on a 2021 Chevy Malibu?
How do you reset the oil life on a 2013 Chevy Malibu?
How do I reset my oil life?
Turn the ignition off, wait a few moments, and then start the engine. Look at the dash to see if the oil light is still flashing or lit. If so, repeat the reset process. If the light is still lit after three reset attempts, contact the manufacturer to learn the correct reset procedure for your vehicle.
How do you reset the oil life on a 2008 Chevy Malibu?
How do you reset the oil life on a 2016 Chevy Malibu?
How do you reset the oil life on a 2006 Chevy Malibu?
How do you reset the oil life on a 2014 Chevy Impala?
1. Turn the ignition to the “RUN” position.
2. Display “OIL LIFE REMAINING” on the DIC.
3. Press and hold the “SET/RESET” button for more than 5 seconds.
4. Oil life will reset to 100%.
How do you reset the oil life on a 2015 Chevy Malibu?
1. Turn ignition switch to ON position with engine off.
2. Push MENU button on the turn signal switch.
3. Use adjustment wheel and select menu – “Vehicle Information System”
4. Use adjustment wheel and select menu – “Oil Life System”
5. Push SET/CLR button on the turn signal switch and push brake pedal at the same time.
How do you reset the oil life on a 2007 Chevy Malibu?
1. Turn the ignition to “Run,” but do not crank the Malibu’s engine.
2. Push the “Menu” button on the left side of the car’s dash repeatedly, until “Oil Life Reset” shows on the odometer message screen.
3. Press and hold the “Reset” button for about three seconds.
How do I reset dashboard after oil change?
Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again. If the light is still on, repeat the process.9 mai 2018
Why is my change oil light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.9 oct. 2019
How do you reset percentage after oil change?
1. Press the setup button and then release it.
2. You should now see a message that reads “Oil life % hold reset = new.”
3. Press the reset button and hold it down for about two seconds.
4. Let off the button and the “Oil Life [percentage (%)]” should reset to 100%.
How much oil does a 2009 Chevy Malibu take?
The 2009 Chevrolet Malibu oil type and capacity iS5w-30 and 7.5 quarts. Having high quality oil is key for the engine to run smoothly.