Turn the ignition to run (one position before starting engine). Press the SELECT/RESET button repeatedly until the engine oil life indicator is displayed. Press and hold the SELECT/RESET button for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.11 oct. 2016
Contents
How do you reset the oil life on a 2008 Chevy Malibu?
How do you reset the oil life on a 2010 Chevy Malibu?
How do I reset the oil life on my dashboard?
How do you reset the oil light on a 2009 Saturn Aura?
1. 1-Turn the ignition to run (second position)
2. 2-Press the INFO button to scroll until the Oil Life displays.
3. 3-Press the INFO and RESET (arrow) buttons on the steering wheel at the same time to display OIL LIFE RESET.
How do you reset the oil life on a 2009 Chevy Cobalt?
How do you reset the oil life on a Chevy Malibu 2020?
How much oil does a 2009 Chevy Malibu take?
The 2009 Chevrolet Malibu oil type and capacity iS5w-30 and 7.5 quarts. Having high quality oil is key for the engine to run smoothly.
How do you reset the oil life on a 2020 Chevy Malibu?
How do you reset the oil life on a 2011 Chevy Malibu?
How do I reset my Chevy Malibu?
1. Turn the ignition to the first position. Do not start the engine.
2. Press the accelerator pedal slowly all the way down 3 times within a 5 second interval.
3. Turn the ignition to the “Off” position. For push-button models, press the “Engine Start/Stop” button once without holding the brake.
How much oil does a 2010 Chevy Malibu take?
The type of oil that is used in the 2010 Chevrolet Malibu iS5W-30 Synthetic for both the 2.4 L 4Cylinder and the 3.6 L V6 engine. The capacity for the Malibu iS5 quarts with a filter for the 2.4 L 4Cylinder and 5.5 quarts with a filter for the 3.6 L V6 engine.
Why is my change oil light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.9 oct. 2019
How do you reset car sensors?
1. Open up the hood.
2. Remove the positive terminal cable from the battery using your pliers or wrench.
3. Go to your fuse box in your car, and look at the diagram.
4. Keep the car disconnected like this for two to three minutes to clear the computer’s memory.
5. Insert the fuse back in to the box.
Will check engine light reset itself?
Your vehicle’s check engine light will will reset by itself once the issue or problem has been repaired; this is true for most models. But the issue may be a bit more involved than simply resetting it. The issue may stem from your car having to run several cycles.6 nov. 2020