1. 1-Turn the ignition to run (second position)
2. 2-Press the INFO button to scroll until the Oil Life displays.
3. 3-Press the INFO and RESET (arrow) buttons on the steering wheel at the same time to display OIL LIFE RESET.
Contents
How do you reset the oil life on a 2013 Chevy Malibu?
How do I reset my 2011 Malibu?
1. Turn the ignition to run (second position)
2. Press the INFO button to scroll until the Oil Life displays.
3. Press the INFO and RESET (arrow) buttons on the steering wheel at the same time to display OIL LIFE RESET.
4. Press and hold the ENTER (arrow) button until the cluster shows ACKNOWLEDGED.
How do you reset the oil life on a 2009 Chevy Malibu?
1. Turn ignition switch to ON position with engine off.
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
3. Change Oil lamp will flash for 2-10 seconds while it resets.
4. Once it stops flashing, the maintenance light reset is complete.
How do I reset my oil life?
Turn the ignition off, wait a few moments, and then start the engine. Look at the dash to see if the oil light is still flashing or lit. If so, repeat the reset process. If the light is still lit after three reset attempts, contact the manufacturer to learn the correct reset procedure for your vehicle.
How do you reset the oil life on a 2011 Chevy Malibu?
How do you reset the oil life on a 2007 Chevy Malibu?
1. Turn the ignition to “Run,” but do not crank the Malibu’s engine.
2. Push the “Menu” button on the left side of the car’s dash repeatedly, until “Oil Life Reset” shows on the odometer message screen.
3. Press and hold the “Reset” button for about three seconds.
How do you reset the oil life on a 2017 Chevy Malibu?
How much oil does a 2011 Chevy Malibu take?
The 2011 Chevrolet Malibu oil type and capacity iS5w-30 and 5.5 quarts. Having high quality oil is key for the engine to run smoothly. You will run into issues with the oil at some point.
What kind of oil does a 2012 Chevy Malibu take?
The 2012 Chevrolet Malibu has either a 2.4 L 4Cylinder or a 3.6 L V6 engine that needS5W-30 Synthetic Motor Oil. The capacity for the car iS5 quarts with a filter for the 2.4 L 4Cylinder and 6 quarts with a filter for the 3.6 L V6 engine.
What does Service Tire Monitor mean on a Chevy Malibu?
Your Chevy Malibu is equipped with a tire pressure monitor system. This system notifies you if the tire pressure is too low. When you get the Service Tire Monitor warning, it indicates that there is a problem with the tire monitoring system itself. Id does not mean that the tire pressure is (necessarily) too low.10 fév. 2021
How do you reset the oil life on a 2008 Chevy Malibu?
How much oil does a 2009 Chevy Malibu take?
The 2009 Chevrolet Malibu oil type and capacity iS5w-30 and 7.5 quarts. Having high quality oil is key for the engine to run smoothly.
How do I reset dashboard after oil change?
Depress the gas pedal slowly three successive times within 10 seconds. At this point, the system should have reset. You can verify by turning the ignition off and then on again. If the light is still on, repeat the process.9 mai 2018
How do you reset percentage after oil change?
1. Press the setup button and then release it.
2. You should now see a message that reads “Oil life % hold reset = new.”
3. Press the reset button and hold it down for about two seconds.
4. Let off the button and the “Oil Life [percentage (%)]” should reset to 100%.