First, park the car and make sure all doors are shut and locked. Then, slot in Your key into the driver side door and unlock the car. Once it opens, quickly put Your key into the ignition slot, and set the cars ignition to the ON position. Once the ignition has been set to ON, make sure You dont start the car.
Contents
How do you reset service theft deterrent?
How do you reset theft deterrent on a Chevy?
To reset the anti-theft system on the Chevy Silverado You will need to get into the car and lock the doors. Now with the doors locked put the key into the ignition and turn it to the on position. Let it sit there for 5 minutes until the anti-theft light blinks.
How do I get my car out of theft mode?
Method 3: Insert the key into your car’s door Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
Will disconnecting battery reset anti-theft?
Disconnect the Battery By unplugging the battery for a few minutes, it will also reset the computer. All you have to do is disconnect the positive or negative terminal and wait. After waiting a few minutes, you can reconnect it and see if that has solved your problem.17 oct. 2020
What triggers theft-deterrent system?
The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) … Charging alarm (electric vehicles only)
How can I bypass pass theft-deterrent system?
1. Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
2. Look at the dashboard and locate the theft system light.
3. Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.
How do I get my car out of anti-theft mode without remote?
1. Close all of your car doors.
2. Insert one key in the door lock and cycle it to the “Lock” position, and then back to the “Unlock” position two times.
3. Enter your car and insert your key into the ignition cylinder.
4. Cycle the key in the ignition from the “Off” position to the “On” position twice in a row.
How do I reset my passlock?
1. Insert your key in the starter, start you car as you usually would and let it stall. Keep the key in the “On” position.
2. Wait until the “Theft Sys” light on your dashboard stays on without blinking. This will take approximately 10 to 15 minutes.
What does it mean to service theft deterrent system?
The immobilizer system design prevents vehicle theft by interrupting the engine operation. The immobilizer system prevents the vehicle from starting. The engine operating functions interrupt if the immobilizer system does not recognize the transponder identification code of the ignition key.
How much does it cost to reset anti theft system?
The Best in Auto Repair The average cost for antitheft system diagnosis & testing is between $44 and $56. Labor costs are estimated between $44 and $56. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
Why is my car in anti theft mode?
A car’s anti-theft system may activate if your key fob battery is dead and hasn’t disabled the system. Make sure the battery is installed correctly in your key fob.3 jui. 2016
Is there a fuse for the anti-theft system?
Can you disable passlock?
The Passlock system on a Vehicles is the anti-theft system. The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. … While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.12 jui. 2017
What does it mean when the security light stays on in your car?
On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.22 fév. 2017