The two base engines the 4.0L V6 (non-flex fuel compatible) and the 4.0L V6 (flex fuel compatible) require 5 quarts of 5W30 synthetic oil while the 4.6L V8 optional engine takes 6 quarts of 5W20 synthetic oil.
Beside above, what kind of oil should I put in a Ford Explorer? The 2.3L 4 -cylinder engine uses SAE 5W-30 and can hold 5.7 quarts. The 3.5L V6 prefers SAE 5W-20 filter and holds 6 quarts.
Also the question is, does a Ford Explorer use synthetic oil? An oil change is one of the most central and vital services for your car. Ford recommends getting your 2021 Ford Explorer oil & filter replenished every 3,000-5,000 miles for conventional oil. Synthetic oil frequently should be replenished every 7,500 – 10,000 miles.
Similarly, can I use 5W30 instead of 5W20 in my Ford Explorer? It won’t hurt. I run 5w30 in my 4.0 and 5w20 in my 4.6.
Furthermore, what oil goes in a 2002 Ford Explorer Sport Trac? Mobil 1 Extended Performance Synthetic Motor Oil 5W-30 5 Quart.You are fine using 10w30 also. Good luck.
Contents
What’s the difference between 5W30 and 5W20?
When comparing 5w20 vs. 5w30 motor oil, the 20 indicates that the oil has a lower viscosity and is thinner at higher temperatures. … So, due to viscosity, 5w20 is a thinner oil during operating temperatures, whereas 5w30 is thicker during operating temperatures.
What kind of oil does a 2003 Ford Explorer take?
Ford Explorer 2003, SAE 5W-30 Synthetic Blend Motor Oil, by Motorcraft®.
What kind of motor oil does a 1999 Ford Explorer take?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.
How often should you change your oil on a Ford Explorer?
When to Change Oil in Your Ford Vehicle Ford Motor Company recommends that you change your oil every 7,500 miles if your Ford model is from 2008 or newer. If your vehicle is from 2007 or earlier, you should have your oil changed every 5,000 miles. These recommended changes are under normal driving conditions.
When should I change the oil in my Ford Explorer?
Ford recommends getting your 2020 Ford Explorer oil & filter changed every 3,000-5,000 miles, but it’s big to check your owner’s manual and with your dealer to find out the intervals that work big for your vehicle.
What type of oil does a 2012 Ford Explorer use?
The approved engine oil is the SAE classification 5W-20 and 5W30 for the 2012 Ford Explorer. The 2012 Ford Explorer 4.6L and 4.0L engine oil capacity is 6 And 5 US quarts.
Will 5W30 hurt a 5W20 engine?
While both 5W20 and 5W30 motor oils are suitable for high mileage engines, the best viscosity type for your vehicle depends on how the manufacturer designed the engine. Using 5W30 when it is advised that you use 5W20 can result in your vehicle not getting good fuel economy.
What happens if you mix 5W20 with 5W30?
You can’t mix between regular/synthetic blend/full synthetic but mixing weights, especially if they’re by the same manufacturer, is no problem.
Can I use 5W30 synthetic instead of 5W20?
Can You Use 5W-30 Instead of 5W-20? In theory, yes, you can switch from using 5W-20 to the 5W-30 because they have similar viscosity ratings. In fact, often, when you take your car to a mechanic for an oil change, they’ll put the 30 instead of the 20 because it’s thicker.