First, go to the driver’s side of Your vehicle, and insert the key into the lock. Turn the lock to the right, or to the unlock position. Hold this position and count for 25 to 40 seconds. Doing this will bypass the anti-theft system.
Likewise, how do I turn off Pats?
- Step 1 – What You Will Need. Following are the things that you need to disable the Ford PATS system:
- Step 2 – Cut the Keys. The second step is to have the keys cut by a local dealer.
- Step 3 – Take Out the Transponder.
- Step 4 – Disable PATS System.
People ask also, how do you turn off the anti-theft system on a Ford Taurus?
- Press the “unlock” button on the remote entry transmitter.
- Insert the coded key into the ignition. Turn the ignition on. The anti-theft light will turn off after approximately three seconds, indicating the system is disabled.
Also, how do you bypass anti theft on a 2000 Ford Explorer? To reset the anti-theft system on a 2000 ford explorer you need to roll down a window and lock all doors from the inside except the drivers, then use the key to lock the drivers door.
Also know, how do I get my car out of anti theft mode? Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
How do I turn off Ford anti-theft system?
Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.
How do I reset my Pats system?
To reset the pats system, turn on the ignition and hold reset for about 5 seconds until a word testt shows up. Then push reset repeatedly until it shows dtc and read the code if there is one. After done, turn the ignition off. It should reset automatically.
How do I reset my Ford Anti theft system?
Turn the ignition to the off position and remove the second coded key from the ignition. After three seconds and before 20 seconds, insert the new uncoded key into the ignition. Turn the ignition to the on position and keep it on for at least 6 seconds. Remove the newly coded key from the ignition.
Can you bypass transponder key?
While it is possible to bypass your car’s immobilizer, it is not recommended. Doing so will leave your car vulnerable to theft and vandalism, since this important feature will no longer be active.
How do you bypass the Pats system on a Ford Taurus?
Yes, there is a simple way to bypass the pats system on your own. All you need is the transponder key to trick the system. By having the transponder key, you can remove the chip inside the key and glue it to the ignition and use any key that matches the original to start up the engine.
Why is the theft light blinking?
The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.
How do you reset the computer on a Ford Taurus?
To reset the computer on the car then You have two options. You can pull the battery cable and let it sit for about 30 minutes. If You don’t want to do that then You can pull the fuse and do the same. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash.
How do I get my 2001 Ford Explorer out of theft mode?
Press the panic button one time. Now, go to the driver’s side of Your car, and get inside. Place Your physical key into the ignition key hole, and turn it to the on position three times in a 10 second period. Now, start the engine, and the anti-theft system should be reset.
How do you reset the anti theft on a 2002 Ford Explorer?
To begin, turn the key in the ignition as if You were trying to start the engine. The engine won’t start since the anti-theft system has been activated. Allow the key to fall back into the ON position so the dashboard lights and radio still work. Leave the key like this for at least 10 minutes.
How do I get my 2000 Ford Expedition out of theft mode?
To reset the anti theft feature on a 2000 Ford Expedition You will need to first turn the ignition off and on three times in rapid succession. On the third time going back in to the on position You will want to leave it there and then press down and remove Your foot off the brake pedal.