To reprogRam the keyless entry pad on a Ford Explorer, type in the factory code found in the owner’s manual. Within 5 seconds, press the 1-2 button, and enter 5 digits that are personal and simple to remember. New numbers must be pressed within 5 seconds of one another to be stored by the Explorer.
Likewise, how do you reset the keyless entry on a 2004 Ford Explorer?
- Close all doors and then open drivers door and press the UNLOCK button on drivers door panel while door is open and insert key in ignition.
- Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN.
Also know, where is the door code on a 2004 Ford Explorer? Locate the five-digit default keypad code on the module. It is under the barcode and is the only five digit number on the label. Use your extendable mirror to get a view of the backside of the module to read the label.
People ask also, how do you change the door code on a 2005 Ford Explorer? To reset the 2005 Ford Explorer keyless entry code simply press the factory code or Your personal code, then press the “3-4” key quickly. This will enable You to key in a new code.
Also, how do I enter my Ford door code?
Contents
How do I reset my Ford keyless entry code?
- Enter the factory-set five-digit code.
- Press and release 1•2 on the keypad within five seconds.
- Press and hold 1•2 for two seconds.
- All personal codes are now erased and only the factory-set five-digit code will work.
Where is the computer module on a 2004 Ford Explorer Sport Trac?
Once the bag is removed, there is an ivory (very pale yellow) box in the upper left side of the opening in front of you. That is the computer module.
How do you program a Ford transponder key with one key?
How do you unlock a 2005 Ford Explorer?
What is the factory set code for Ford Explorer?
The obvious answer is to check Your owner’s manual. It will be in the wallet card, left in the glove boxBy the manufacturer. It is called the “factory default code” on the card. If You don’t have access to the manual, the code can be found on the Remote Anti-Theft Module, also referred to as the RAP.
How do you unlock a Ford Explorer with a code?
From the vehicle list menu, select Door Keypad Code. Enter your factory key code that can be found in the owner’s manual. Enter your new personal key code. After you have entered in your factory code, wait for the prompt and enter in a new 5-digit key code of your choosing.
Where can I find the factory code Ford?
Using a flashlight, locate the removable panel and turn two thumb screws counterclockwise to remove the plastic panel. Shine the flashlight onto the RAP module and look for the label containing the 5 digit factory code.
How do I find my keyless entry code?
You can operate the keypad with the factory-set five-digit entry code. The code is on the owner’s wallet card in the glove box and is available from an authorized dealer.
How do I setup my Ford keypad?
- On the keypad, enter the 5-digit, factory-set code that came with your vehicle.
- Within five seconds, press the 1-2 button on the keypad.
- Enter your desired, new 5-digit code.
- Press the 1-2 button on the keypad to save your new personal code.