- Switch the ignition over to the on position.
- Go to the SETTINGS menu.
- Scroll and select VEHICLE.
- Scroll down to OIL LIFE RESET.
- Press and hold the OK button.
- Shut the vehicle off and then start it back up and check the oil change light should be gone.
Similarly, how do you check the oil on a Ford Explorer?
Subsequently, how do you check the oil life on a Ford?
- Using the information display controls on the steering wheel, scroll to ‘Settings’ and press the right arrow button.
- Scroll to ‘Vehicle’ and press the right arrow button.
- Scroll to ‘Oil Life‘ and press the right arrow button.
Also, where is the oil life indicator? The oil indicator light on your instrument panel usually looks like a little oil canister. You can see a little handle, a spout and typically even a drop of oil on this light when it illuminates.
In this regard, how do you check the oil life on a 2017 Ford Explorer?
- Turn on the ignition without starting the engine.
- Go to the SETTINGS menu.
- Scroll and select CONVENIENCE or VEHICLE.
- Select OIL LIFE RESET.
- Push and hold the OK button.
- Turn the ignition off and start the engine to verify the indicator has been reset.
If you just add oil to your car’s engine periodically, that’s far better than letting your car run out of oil, but you’re still going to create a lot of problems if that’s all you do. … If that’s the case, you’re likely keeping the same oil filter in the engine, too. So that’s never being replaced.
How do you read a Ford Fusion dipstick?
Can you reset oil life monitor?
Press the Trip/Reset button to cycle to “Setup Menu Hold Reset” message. 2. Press and hold Trip/Reset button for two seconds until “Reset for System Check” message appears. … Immediately press and hold button for two seconds until “Oil Life Set To 100%” is displayed.
Is the Ford oil life indicator accurate?
Oil Life Monitoring systems are (thankfully) pretty accurate! Studies have shown that when the same vehicle was subjected to both around-town driving and then highway driving, the warning light came on much later during the highway driving.
What percentage oil life should I change it?
Make sure the monitor is reset every time the oil is changed and I would change it between 40 and 20 percent.
Can I still drive with 15% oil life?
With fresh engine oil, your percentage starts/resets at 100%. … The yellow wrench does not mean your car is unsafe to drive when you see it appear with an oil life percentage at 15% or less – instead you should know you’ll soon need to take your Honda for regular car care.
How far can you drive on 5% oil life?
Recommended Services Hi There, Your oil life percentage is generally an estimated time designed to prompt the operator of the vehicle to have the oil changed as soon as possible. 5% is generally not something to be concerned about, but you should consider having the oil changed in the next 1,000 miles or less.
What does 4 oil life remaining mean?
The percent of oil life remaining is just an indicator of relative amount of time before the oil needs service. It is also a means for the dealer to deny a warranty claim based on you driving it for 10000 miles after the indicator came on.
How do you reset the oil change light on a 2020 Ford Explorer?
How do you reset the oil change light on a Ford Explorer?
Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “Hold Reset For Setup Menu” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.