- Turn on the ignition without starting the engine.
- Go to the SETTINGS menu.
- Scroll and select CONVENIENCE or VEHICLE.
- Select OIL LIFE RESET.
- Push and hold the OK button.
- Turn the ignition off and start the engine to verify the indicator has been reset.
Correspondingly, how do you check the oil on a Ford Explorer?
Moreover, how often does a 2018 Ford Explorer need an oil change? An oil change is one of the most key and vital services for your car. Ford recommends getting your 2018 Ford Explorer oil & filter changed every 3,000-5,000 miles, but it’s first-rate to check your owner’s manual and with your dealer to find out the intervals that work first-rate for your vehicle.
Likewise, how do you check the oil life on a Ford?
- Using the information display controls on the steering wheel, scroll to ‘Settings’ and press the right arrow button.
- Scroll to ‘Vehicle’ and press the right arrow button.
- Scroll to ‘Oil Life’ and press the right arrow button.
Subsequently, where is the oil life indicator? The oil indicator light on your instrument panel usually looks like a little oil canister. You can see a little handle, a spout and typically even a drop of oil on this light when it illuminates.If you just add oil to your car’s engine periodically, that’s far better than letting your car run out of oil, but you’re still going to create a lot of problems if that’s all you do. … If that’s the case, you’re likely keeping the same oil filter in the engine, too. So that’s never being replaced.
Where is the dipstick on a 2008 Ford Explorer?
There is no transmission dipstick for the 2008 Ford Explorer. The transmission is sealed. Ford claims that it never needs maintenance.
Does 2018 Ford Explorer need synthetic oil?
The oil type for the 2018 Ford Explorer is a full synthetic oil. The 2.3L 4 -cylinder uses SAE 5W-30and can hold up to 5.7 quarts. The 3.5L V6 runs on SAE 5W-20 with an oil capacity of 6 quarts.
What kind of oil does a 2019 Ford Explorer take?
Ford Explorer 2019, SAE 5W-30 Synthetic Blend Motor Oil, by Motorcraft®.
How long can you go between oil changes?
It used to be normal to change the oil every 3,000 miles, but with modern lubricants most engines today have recommended oil change intervals of 5,000 to 7,500 miles. Moreover, if your car’s engine requires full-synthetic motor oil, it might go as far as 15,000 miles between services!
Is the Ford oil life indicator accurate?
Oil Life Monitoring systems are (thankfully) pretty accurate! Studies have shown that when the same vehicle was subjected to both around-town driving and then highway driving, the warning light came on much later during the highway driving.
How do you reset the oil life on a 2020 Ford Explorer?
Can you reset oil life monitor?
Press the Trip/Reset button to cycle to “Setup Menu Hold Reset” message. 2. Press and hold Trip/Reset button for two seconds until “Reset for System Check” message appears. … Immediately press and hold button for two seconds until “Oil Life Set To 100%” is displayed.
Can I still drive with 15% oil life?
With fresh engine oil, your percentage starts/resets at 100%. … The yellow wrench does not mean your car is unsafe to drive when you see it appear with an oil life percentage at 15% or less – instead you should know you’ll soon need to take your Honda for regular car care.
At what percent should oil be changed?
My dealership recommends it be changed at 15%. It’s going to be a personal preference if you want to go less than that. I would definitely not go below 0% though as there may be some data left in the car that could be pulled and impact a warranty issue if one was to arise.
How far can you drive on 5% oil life?
Recommended Services Hi There, Your oil life percentage is generally an estimated time designed to prompt the operator of the vehicle to have the oil changed as soon as possible. 5% is generally not something to be concerned about, but you should consider having the oil changed in the next 1,000 miles or less.