Push the 7/8 9/0 at the same time, you should hear all the doors lock, wait at least 30 seconds, then enter your unlock code on to the pad, that should unlock the drivers door and deactivate the alarm system.
Also know, how do you turn off the alarm on a Ford Explorer? To reset the alarm on the Ford Explorer You have two options. You can pop the hood and disconnect the positive battery cable, then leave it off for about 30 minutes. This will make the power in the CPU drain, which will force the system to reset itself the next time it comes on.
Also, how do I disarm my Ford Anti-theft system? Locate the override button on the alarm box, beneath the driver’s side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the antitheft system is disabled.
Likewise, how do I disable Ford alarm? The active system, a factory alarm, only takes minutes to disable and reset when needed. Press the unlock button on your vehicle’s key fob to deactivate the alarm.
People ask also, how do I get my car out of anti-theft mode? Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.To reset the anti-theft system on a 2000 ford explorer you need to roll down a window and lock all doors from the inside except the drivers, then use the key to lock the drivers door.
How do I get my 2001 Ford Explorer out of theft mode?
Press the panic button one time. Now, go to the driver’s side of Your car, and get inside. Place Your physical key into the ignition key hole, and turn it to the on position three times in a 10 second period. Now, start the engine, and the anti-theft system should be reset.
How do I permanently disable anti-theft system?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
Will disconnecting battery reset anti-theft?
One last thing you can try if your car alarm is going off and you can’t get it to stop, but you can get under the hood is to disconnect the battery. By unplugging the battery for a few minutes, it will also reset the computer. All you have to do is disconnect the positive or negative terminal and wait.
How do I reset my Ford anti-theft?
Turn the ignition to the off position and remove the second coded key from the ignition. After three seconds and before 20 seconds, insert the new uncoded key into the ignition. Turn the ignition to the on position and keep it on for at least 6 seconds. Remove the newly coded key from the ignition.
How do I permanently disable my car alarm?
- try starting your car.
- hit the panic button (again)
- remotely lock or unlock the car.
- use your key to physically open your driver’s side door.
- open the trunk (or use other buttons on the remote)
- remove the alarm fuse.
- disconnect the vehicle’s battery.
Why does my Ford alarm keep going off?
Being among the most common reasons a car might break down, a dying battery can be the culprit behind your alarm turning on at random times. … If your battery is low on power, then the alarm will go off whenever you turn on your car. Think of it as the car letting you know that it’s time to replace it.
Can you disable Ford Pats?
Yes, there is a simple way to bypass the pats system on your own. All you need is the transponder key to trick the system. By having the transponder key, you can remove the chip inside the key and glue it to the ignition and use any key that matches the original to start up the engine.
Is my car in anti-theft mode?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem.
Can you disable passlock?
The Passlock system on a Vehicles is the anti-theft system. The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. … While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.